**ACCEPTING PRE-AUCTION OFFERS ON MAJOR MACHINES**

CNC 4-AXIS DEEP HOLE GUN DRILLING MACHINE

• 2016 Hong JI ST-1500 CNC 4-Axis Deep Hole Drilling Machine, Fanuc 0i-MF CNC Control, Max. Drill Depth: 59.055”, Drilling Diameter Range: 0.19″-1.57”, Spindle Speeds to 6000 RPM, 15 HP, 0.393″-5.90 IPM Spindle Feed, Travels: X-Axis Table Cross Travel: 62.99”, Y-Axis Vertical Travel: 39.37”, Z-Effective Stroke: 59.055”, W-Column In-Out: 19.68”, Rotary Table Size: 47.24” x 47.24”, Max. Work Weight on Rotary Table: 3,300 Lbs. BT-40 Taper Spindle, Chip Conveyor, Ying Wei DF-140 140L/min Coolant System, Filtration System, S/N 61150T1N [2016] VIEW LOT #70
  

CNC 5-AXIS HORIZONTAL MACHINING CENTER

• 2015 OKK HM1000S CNC 5-Axis Horizontal Machining Center, Fanuc 31i-B5 CNC Control, Travels: X-55.12″, Y-43.31″, Z-39.37″, Dual 39.4″ x 39.4″ Pallets, 0.001 Deg. Pallet Rotation, 5500 Lb. Work Weight, 60-Position ATC, CAT 50 Taper, 12,000 RPM Spindle Speed, 60 HP Spindle Motor, 1889 IPM Rapid Traverse Rate, Thru-Spindle Coolant, Chip Conveyor, S/N 371 [2015] VIEW LOT #63

CNC VERTICAL MACHINING CENTERS

• 2014 OKK VM76R CNC Vertical Machining Center, Fanuc 31i-B5 CNC Control with Hand Pendant, Travels: X-60.63″, Y-29.92″, Z-25.98″, Table Size: 61.02″ x 29.92″, 3,307 Lb Work Weight, 30-Position ATC, CAT 50 Taper, 12,000 RPM Spindle Speed, 40 HP Spindle Motor, Rapid Traverse Rates, X/Y/Z: 945/945/787 IPM, 2-Rear Chip Augers, Chip Conveyor, Chip Blaster D30-70 High Pressure Coolant Filtration System, Thru-Spindle Coolant, S/N 180 [2014] VIEW LOT #64
  
• 2014 OKK VM53R CNC Vertical Machining Center, Fanuc 31i-B5 CNC Control with Hand Pendant, Travels: X-41.3″, Y-20.8″, Z-20.1″, Table Size: 41.3″ x 22.1″, 1764 Lb Work Weight, 30-Position ATC, CAT 50 Taper, 8000 RPM Spindle Speed, 25/20 HP Spindle Motor, Rapid Traverse Rates, X/Y/Z: 1181/1181/787 IPM, 2-Rear Chip Augers, Chip Conveyor, Chip Blaster D30-70 High Pressure Coolant Filtration System, Thru-Spindle Coolant, S/N 459 [2014] VIEW LOT #65
  
• Milltronics VKM3 CNC Vertical Knee Mill, Centurion 7 CNC Control, 3 HP, 50″ x 12″ Table, 30″ Table Travel, 15″ Saddle Travel, 18″ Knee Travel, 13″ Ram Travel, R-8 Spindle Taper, 60-4200 Spindle RPM, 5″ Spindle Stroke, 220V, 3PH, S/N 9027 VIEW LOT #60
  

CNC HIGH SPEED GRAPHITE MILL

• 2015 Roku-Roku HC658-II CNC Graphite Mill, Fanuc 31i-B5 CNC Control, Travels: X-23.6″, Y-19.6″, Z-15.7″, Table Size: 20″ x 30″, 30-Position ATC, HSK-E40 Taper Spindle, 200-32,000 Spindle RPM, 8.4 HP Spindle Motor, with Amano PiE Graphite Dust Collector, S/N G254 [2015] VIEW LOT #69
  

CNC EDM MACHINES

• 2015 Mitsubishi EA28V Advance CNC 4-Axis Die-Sinking EDM, Mitsubishi Advance CNC Control, Travels: X-25.59″, Y-17.71″, Z-13.78″, Standard C-Axis, 20-Position ATC, System 3R Tooling, 41.33″ x 29.92″ x 25.4″ Max. Work Dimensions, 33.46″ x 23.62″ Clamping Surface, S/N 05E2A260 VIEW LOT #67
  
• 2014 Mitsubishi MV2400S CNC Wire EDM, Mitsubishi CNC Control, Travels: X-23.6″, Y-15.7″. Z-12.2″, Max. Workpiece: 41.3″ x 32.3″ x 12″, 3,307 Max. Work Weight, Depth of Max Taper Angle: 15 Degree at 10.2″, Wire Diameter: 0.1mm to 0.3mm, Wire Chopper, Hand Pendant, S/N 54DM2631 [2014] VIEW LOT #68
  

CNC TURNING CENTER

• 2015 Mitsubishi LT-400M CNC Turning Center with Live Milling, Mitsubishi M70 CNC Control, 15.75″ Max. Swing, 30″ Between Centers, 2.05″ Bar Dia. Capacity, 8″ 3-Jaw Chuck, 4000 Max Spindle RPM, 12-Position Turret, Tool Setter, Tailstock, Chip Conveyor, S/N 65BM00030 [2015] VIEW LOT #66
  

CNC & MANUAL SURFACE GRINDERS

• 2016 Chevalier FSG-4080DC CNC Bridge-Type Horizontal Surface Grinder, Smart CNC Control, 39.4″ x 79″ Table, 39.37″ x 39.37″ Magnetic Chuck Mounted on Table, 39.4″ Max. Grinding Width, 78.7″ Max. Grinding Length, 35.4″ Max. Distance Spindle to Table, 55.1″ Between Columns, 20.08″ x 3.94″ x 5″ Wheel, 16-82 FPM/5-25 m/min Table Speed, 500-2000 Spindle RPM, 25 HP Motor, S/N FED146001 [2016] VIEW LOT #62
  
• 2015 Chevalier FSG-1632ADIII CNC Horizontal Surface Grinder, Chevalier CNC Control, 15.75″ x 31.5″ Magnetic Chuck, 16″ Max Grinding Width, 32″ Max Grinding Length, 24″ Max Distance from Spindle to Table, 770 Lb. Max Table Load, 31.5″ Longitudinal Travel, 16″ Automatic Crossfeed Travel, 16-82 FPM/5-25 m/min Table Speed, 0.000050″ to 0.002″ Vertical Incremental Downfeed, 14″ x 2″ x 5″ Wheel, 1750 Spindle RPM, 5HP Spindle Motor, S/N FFC155003 [2015] VIEW LOT #61
  
• Chevalier FSG2A618 Horizontal Surface Grinder, 6” x 18” Magnetic Chuck, S/N FB7156004 VIEW LOT #47
  

MILLING & DRILLING MACHINES

• (2) 2016 Sharp TMV Vertical Knee Mills, 54″ x 10″ Table, 39″ Table Travel, 16.3″ Saddle Travel, 15.3″ Knee Travel, 18.5″ Ram Travel, 5″ Spindle Stroke, R-8 Spindle Taper, 60-4500 Spindle RPM, Sharp Power Feeds, Acu-Rite DRO, 220/440V, 3PH, S/N’s 50304507, 50304506 [2016] VIEW LOT #58 / VIEW LOT #59
  
• Sharp RD-1230 Radial Arm Drill, 12″ Column Diameter, 4′ Arm, MT#4 Taper Spindle, 37-1500 Spindle RPM, 10″ Spindle Stroke, 25″ x 20.5″ x 16.5″ T-Slotted Box Table, 5HP, 220/440V, 3PH, S/N 20658 VIEW LOT #57
  
• 2017 Jet JMD-15 Milling & Drilling Machine, 13mm Drill Chuck, 3.75″ Spindle Stroke, 110-2580 Spindle RPM, 23″ x 7.5″ Table, 10″ Table Travel, 6.5″ Saddle Travel, 1HP, 115/230V, 1PH, S/N 17033794, with 3-1/2″ Tilt Vise, & Jet CS-18 Stand VIEW LOT #56
  
• Palmgren 33″ Radial Arm Bench Drill Press, 16mm Chuck, 3″ Spindle Stroke, 600-2952 Spindle RPM, 8.5″ x 8″ Table, 24″ x 25″ Aluminum Table, 1PH VIEW LOT #55
  

LATHES

• 2016 Sharp 1660L Gap Bed Engine Lathe, 16″ Swing Over Bed, 9.5″ Swing Over Cross Slide, 60″ Between Centers, 40-2000 Spindle RPM, 3-1/8″ Hole Thru Spindle, 10″ 3-Jaw Chuck, Shars 250-300 Dove-Tail Tool Post, Steady Rest, Tail Stock, Fagor Innova DRO, S/N 5004238 VIEW LOT #54
  

SAWS

• 2014 Cosen SVC-670DM Tilt Frame Double Mitering Semi-Automatic Vertical Bandsaw, 19.1″ Max Vise Opening, 39.4″ Work Bed Height, 66-264 FPM Blade Speed, 192.1″ x 1.3″ x 0.043″ Blade Size, 60 Degree Mitering Tilt, 5HP, 1HP Hydraulic Pump, 22-Gallon Hydraulic Tank, 1/4HP Coolant Pump, 34-Gallon Coolant Tank, Hitech HMI, 440/480V, 3PH, S/N 1031706 VIEW LOT #53
  
• Jet J-7015 8″ x 13″ Horizontal Bandsaw, 68 to 235 FPM Blade Speed, 1.5HP, 115/230V, 1PH, S/N 14011519 [2014] VIEW LOT #52
  

MISCELLANEOUS EQUIPMENT

• (2) 2017 Cress C163212/PM3T Electric Heat Treat Furnaces, 17″ x 30″ x 12″ Chamber, 480V, 26A, with Steel Loading Cart [2017] VIEW LOT #40 / VIEW LOT #41
  
• Hong Ji Tool Grinder, 1HP, 2850/3420 RPM, 220/380V, 3PH VIEW LOT #46
  
• Darex V390 Drill Sharpener, 1/3HP, 11.4/13.8 m/s Wheel Speed, 115V, 1PH, S/N 38001778 VIEW LOT #45
  
• Jet JBG-8A 8″ Double-End Pedestal Grinder, 5/8″ Arbor, 1HP, 3450 RPM, 115V, 1PH, S/N 16061591 VIEW LOT #44
  
• 2015 Rockwell HR-150A Hardness Tester, S/N 0170 [2015] VIEW LOT #38
  
• Ingersoll Rand SS4L5 60-Gallon Vertical Tank Air Compressor, 5HP, 90 PSIG Max, 230V, 1PH, S/N CBV725244 VIEW LOT #163
  
• Central Machinery 20-Ton Manual H-Frame Shop Press, 22.5″ Between Posts VIEW LOT #39
  
• Miller Syncrowave 250DX AC/DC TIG & Stick Welder, 3 to 310A Output, 250A at 40% Duty Cycle, Input: 200/230/460V, 1PH, S/N MG290794L, with Tig Torch, Miller MG-24 Foot Pedal Control, & Integrated Water Chiller VIEW LOT #49
  

TOOLING & SHOP SUPPORT

• Large Quantity of CAT & HSK Tool Holders, Vises, Precision Gauges, Pedestal Grinders, Tool Sharpeners, Tool Cabinets, Benches, Desks, Flame Cabinets, Dump Hoppers, Etc.