**ACCEPTING PRE-AUCTION OFFERS ON MAJOR MACHINES**

CNC GANTRY MILLS

• 2015 Linmax-1625 CNC 5-Axis High Speed Gantry Mill, Heidenhain iTNC530 CNC Control, TCH-19 IM Direct Drive 2-Axis Milling Head, Travels: X-98.4”, Y-62.9”, Z-39.4”, Table Size: 98.4″ x 62.9″, Spindle Speeds to 24,000 RPM, HSK63 Taper, 30-Position Automatic Tool Changer, Blum Tool System, Hand Pendant, S/N 1625014 [2015]  VIEW LOT #75
• 2014 Parpas Diamond Linear 30 CNC 5-Axis High-Speed Gantry Mill, Heidenhain TNC 640 CNC Control, 118″ x 96″ x 48″ Travels, 122″ x 110″ Table, 2-Axis Milling Head, 20,000 RPM, 24-Position Automatic Tool Changer, HSK63 Taper, Coolant, (2) Chip Conveyors, Sludge Separator, S/N SE-DIA001 [2014] SOLD
  
• 2013 Parpas Diamond Linear 30 CNC 5-Axis High Speed Gantry Mill, Heidenhain i530 CNC Control, 88.6″ x 59″ x 48″ Travels, 92.25″ x 62.5″ Table, 20,000 RPM, 2-Axis Swivel Rotating Spindle, 24-Position Automatic Tool Changer, HSK63 Taper, Coolant, (2) Chip Conveyors, S/N SE-DL020 [2013] SOLD
  
• Parpas Diamond #2 CNC 5-Axis Gantry Mill, 86″ x 59″ x 39″ Travels, 63″ x 92″ Table, 44,000 Lb. Table Load Cap., 8,000 RPM, 2-Axis Milling Head, HSK63 Taper, Selca CNC Controls, Hand Pendant, [2003] VIEW LOT #78
  
• Tarus HS0HTB810 CNC Gantry Mill, 118″ x 98″ x 50″ Travels, 157″ x 89” Table, 10,000-RPM, CAT 50, Fidia C10 CNC Control, Hand Pendant, S/N HSQHTB1877006 [2000] VIEW LOT #79
  

CNC GUN DRILLS

• 2017 Tarus GDTTC510-6XRT CNC 6-Axis Deep Hole Gun Drilling Machine, Tarus Aldebaran CNC Control, Travels: X-130” (Horizontal), Y-60” (Vertical), Z-46” (Column In-Out), +/-15 Degree Head Tilt, 3400 RPM Gun Drilling Spindle, 2″ Max. Gun Drilling Dia., 93.4” Max Drill Stroke, 81.4” Max Drill Stroke with 3 Whip Guides, 118” x 118” Square T-Slotted Infinite 360-Degree Contouring Rotary Table, 80,000 LB. Table Work Weight Capacity, 3500 RPM CAT 50 Auxiliary Spindle, High Pressure Coolant System, Coolant Reservoir & Pump, Filtration System, Jorgensen Chip Conveyor, S/N GDCRTT320300742 [2017]   VIEW LOT #80
  
• Tarus TPTCGD 84120 CNC Gun Drill, 120″ x 114″ x 44″ Travels, 84″ x 120″ T-Slotted Table, 3,500 RPM Primary Spindle, 2,000 RPM Auxiliary CAT 50 Spindle, Lemoine CNC Control, Hand Pendant, Thru Spindle Coolant, Chip Conveyor, S/N TPTCGD1804049 VIEW LOT #81
  
• Tarus TPTCGD 511S CNC Gun Drill, 130″ x 60″ x 96″ Travels, 60″ x 106″ T-Slotted Table, 3500 RPM Primary Spindle, 2,000 RPM Auxiliary CAT 50 Spindle, Tarus CNC Control, Hand Pendant, Thru Spindle Coolant, Chip Conveyor, S/N TPTCGDCNC 1376336 VIEW LOT #82

CNC SINKER EDMS

• 2016 Makino EDNC15 CNC Sinker EDM, Extended Travels: X-67″, Y-45″, Z-31″,C-Axis Head, 98” x 62.9” x 31.5” Tank Size, 53″ x 78.5″ Table, Hyper I Touch Screen CNC Control, 16-Position ATC, (2) 39″ x 47″ Tooling Plates, Erowa Chuck System, Drop Tank VIEW LOT #101
  
• 2007 Agie Charmilles Agietron Spirit 3 CNC Sinker EDM, GF Touch Screen CNC Control, 12.7” x 15.7″ x 13.8″ Travels, 19.75″ x 27.5″ Table, C-Axis Head, 10-Position ATC, Drop Tank, Erowa System VIEW LOT #102
  
• EDM Solutions Titan CNC Sinker EDM, 51.1″ x 26.57″ x 17.6” Travel, 55″ x 36″ Table, Front Access Tank, Power Supply, Oil Filtration System, S/N 9030 VIEW LOT #104
  
• EDM Solutions Polaris CNC Sinker EDM, 23.435″ x 17.831″ x 15.385″ Travels, 23″ x 39″ Table, EDM 300S Controls, Front Access Tank, Power Source, Oil Filtration, S/N 9048 VIEW LOT #103
  

CNC BRIDGE MILLS

• 2008 YCM Industries DCV4025B CNC Bridge Mill, Fanuc MXP-200i CNC Control, 160″ x 98″ x 40″ Travels, 160” x 95″ Table, 120-Position Automatic Tool Changer, 6000 RPM, CAT 50, Thru-Spindle Coolant, Operator Platform, Chip Conveyor, Chip Blaster D30, S/N 10001 VIEW LOT #91
• Awea SP3016 CNC Bridge Mill, Fanuc Series O-M CNC Control, 120″ x 63″ x 30″ Travels, 59″ x 128″ Table, 3000 RPM, #50 Taper, Chip Conveyor, Coolant, S/N 5116 VIEW LOT #84
  
• Sogotec BD3223 CNC Bridge Mill, Fanuc Series 18-M CNC Control, Travels: X-126″, Y-63″, Z-31.5″ Travels, 79″ x 118″ Table, 5000 RPM, CAT 50, 40-Position Automatic Tool Changer VIEW LOT #83

CNC DUPLEX MILLING MACHINE

• Hamai 4DS-A CNC Duplex Milling Machine, Fanuc 0-Mate-M CNC Control, Dual Opposed Milling Heads, 48.81” Between Heads, (2) 32” x 32” Rotary Tables, 78” x 19.68” Main Table, 47.24” X-Axis Travel, 15.74” Y & Z-Axes Travel, 14.75 HP Motor, Chip Auger, Chiller

CNC VERTICAL MACHINING CENTERS

• 2007 OKK VP600 CNC 5-Axis Vertical Machining Center, Fanuc Series 310is CNC Control, Travels: X-44″, Y-24″, Z-18″ Travels, with 20″ x 20″ 5th Axis Trunnion-Mounted Rotary Table, 20,000 RPM, 30-Position Automatic Tool Changer, CAT 40, Thru-Spindle Coolant, S/N 12634   VIEW LOT #92
  
• 2007 OKK VM7 III CNC Vertical Machining Center, Neomatic 730 CNC Control, Travels: X-60″, Y-30″, Z-26″ Travels, Table Size: 60″ x 29″, 10,000 RPM, CAT 50 Spindle, 30-Position Automatic Tool Changer, Coolant, Chip Auger, S/N 12539 VIEW LOT #93
  
• Strathclyde SMV-850 CNC Vertical Machining Center, Travels: X-33″, Y-20″, Z-21″ Table Size: 17″ x 38″, 8000 RPM, CAT 40, 20 ATC, Aercology DM1500 Dust Collector, Creative Evolution CNC Control, S/N 2K11091 VIEW LOT #97
  
• Strathclyde HS-500 CNC High Speed Graphite Vertical Machining Center, Travels: X-20″, Y-16″, Z-16″, Table Size: 19.5″ x 23.5″, 45,000 RPM, CAT 40, 16 ATC, Aercology DM-1500 Dust Collector, Erowa 5-Pos. Chuck System, Full Enclosure, EST Planar PL1500M CNC Control, S/N 0110006 VIEW LOT #94
• Strathclyde HS-500 CNC High Speed Graphite Vertical Machining Center, Travels: X-20″, Y-16″, Z-16″, Table Size: 19.5″ x 23.5″, 45,000-RPM, CAT 40, 16 ATC, Aercology DM-1500 Dust Collector, Full Enclosure, EST Planar PL1500M CNC Control, S/N 112016 VIEW LOT #95
  
• Strathclyde HS-1300 CNC High Speed Vertical Machining Center, Travels: X-51″, Y-27″, Z-23″, Table Size: 59″ x 27.5″, 10,000 RPM, CAT 40 Spindle, EST Control, 20-Position Automatic Tool Changer, Coolant, Chip Conveyor, S/N 02004 VIEW LOT #98

CNC TRAVELING COLUMN HORIZONTAL BORING, MILLING, & DRILLING MACHINE

• FPT Pragma M CNC Traveling Column Horizontal Boring, Drilling, & Milling Machine, with 18.75” x 25.5” Ram, Travels: X-157.48″, Y-63”, Z (Ram)-47.24”, Table Size: 98” x 157”, Universal Swivel Head with Approx 18,000 RPM, CAT 50 Taper, Fidia C10 Control, Hand Pendant, Coolant, Chip Conveyor, S/N PM4003051 [2003] VIEW LOT #85

CNC TRAVELING COLUMN HORIZONTAL MILLING MACHINES

• Anayak HVM-H-5000 CNC Traveling Column Horizontal Milling Machine, Heidenhain CNC Control, Travels: X-168″, Y-84”, Z-48”, Table Size: 68″ x 182″, 3200 RPM, CAT 50, Operator Platform, Coolant, Chip Conveyor, S/N 20000704 VIEW LOT #86
  
• Anayak HVM-H-3300 CNC Traveling Column Horizontal Milling Machine With Automatic Indexing Universal Head, Heidenhain CNC Control, Travels: X-104″, Y-75″, Z-41″, Table Size: 44″ x 130″ Table, 3000 RPM, CAT 50, Operator Platform, Coolant, Chip Conveyor, S/N 11626-HVM VIEW LOT #87
  
• Anayak HVM-H-3300 CNC Traveling Column Horizontal Milling Machine With Automatic Indexing Universal Head, Heidenhain CNC Control, Travels: X-104″, Y-75″, Z-41″, Table Size: 44″ x 130″ Table, 3000 RPM, CAT 50, Operator Platform, Coolant, Chip Conveyor, S/N HVM-10135 VIEW LOT #88
• Anayak HVM-H-3300 CNC Traveling Column Horizontal Milling Machine, Heidenhain CNC Control, 167″ x 106″ x 47″ Travels, 47″ x 130″ Table, 3200 RPM, CAT 50, Operator Platform, Coolant, Chip Conveyor, S/N M-9800108 VIEW LOT #90
  
• Anayak HVM-H-3300 CNC Traveling Column Horizontal Milling Machine, Heidenhain CNC Control, 104″ x 75″ x 41″ Travels, 47″ x 130″ Table, 3200 RPM, CAT 50, Operator Platform, Coolant, Chip Conveyor, S/N M990503 VIEW LOT #89
  

TRYOUT & SPOTTING PRESSES

• HPT 2500-Ton Vertical Hydraulic Tryout Press, 4-Post, 138″ x 84″ T-Slotted Bed, 96″ x 142″ T-Slotted Ram, 56″ Windows, 72″ Stroke, 20″ Shut Height, 82″ Max. Daylight, Allen Bradley PanelView 550 PLC, (2) Palm Button Pedestals, Self Contained Hydraulic System, In Pit; (2) 6-Zone Hot Water Mold Heating Manifolds VIEW LOT #106
  
• Abeseiki CDS-2520-200M 200-Ton Hydraulic Spotting Press, 98″ x 78″ T-Slotted Roll Out Bolster, 79″ x 98″ T-Slotted Swing Out Top Platen, 86″ Max. Day Light, 47″ Windows, 15.3″ Shut Height, Self Contained Hydraulic System, Analog Controls, S/N 651102 VIEW LOT #107
  
• Millutensil MIL203 165-Ton Hydraulic Spotting Press, 165-Ton, 4-Post, 59″ x 79″ T-Slotted Rolling Bolster Bed, 59″ x 79″ T-Slotted Swing Out Top Platen, 65″ Open Height, Top Mounted Hydraulic Unit, Remote Operator Control Pedestal, S/N 811/20314 VIEW LOT #108
  

FORKLFITS & MATERIAL HANDLING

• Allis Chalmers ACC 120RL PS Forklift, 12,000 LB. Max. Load Capacity, LP Gas Engine, Overhead Guard, 2-Stage Mast, 105″ Max. Lift Height, 62″ Forks, Solid Tires, S/N ALN512853 VIEW LOT #229
  
• Hyster S-150A Forklift, 14,600 LB. Max. Load Capacity, Overhead Guard, 2-Stage Mast, 129″ Max. Lift Height, 48″ Forks, Solid Tires, LP Gas Engine, S/N A024D04636B VIEW LOT #227
  
• Hyster S-50FT Forklift, 4700 LB. Max. Load Capacity, Overhead Guard, 3-Stage Mast, 189″ Max. Lift Height, Side Shift, Solid Tires, LP Gas Engine, S/N F187V03706C VIEW LOT #226
  
• Komatsu FG25ST-1 Forklift, 4300 LB. Max. Load Capacity, Overhead Guard, 3-Stage Mast, 188″ Max. Lift Height, 48″ Forks, Side Shift, Solid Tires, LP Gas Engine, 8714 Metered Hours VIEW LOT #228
  
• Raymond 20DR25TT Stand Up Ride-On Forklift, 2500 LB. Max. Load Capacity, Overhead Guard, 2-Stage Mast, Approx. 144″ Max. Lift Height, 48″ Forks, Side Shift, Solid Tires, Battery Powered, Charger Unit VIEW LOT #231
  
• 2012 JLG 2630ES Scissor Lift, 500 LB. Max. Load Capacity, 30″ x 40″ Platform, Extension, 25′ Max. Lift Height, Solid Tires, Battery Powered, On Board Charger, S/N 200204549 VIEW LOT #230
  
• Elwell-Parker Die / Mold Mover, 20,400 Max. Load Capacity, Open Station, 24″ Max. Lift Height, 48″ x 100″ Load Deck, Solid Tires, LP Gas Engine VIEW LOT #225
  

ADDITIONAL EQUIPMENT

• Okamoto PSG-125 Hydraulic Surface Grinder, 48” x 21” Magnetic Chuck, 1750-RPM Spindle, Coolant, Sludge Separator, S/N 1533 VIEW LOT #72A
  
• Kent KGS-410 AHD Hydraulic Surface Grinder, 39.5″ x 16” Magnetic Chuck, 3450 RPM Spindle, Control Pedestal, Sludge Separator VIEW LOT #72
• 8’ x 19” Carlton 4A Radial Arm Drill, 8’ Arm, 19″ Column Diameter, 50″ x 102″ T-Slotted Table, 32″ x 36″ T-Slotted Side Table, 10 to 1000-RPM Spindle, Coolant, (2) 19.5″ x 29.5″ x 40″ T-Slotted Riser Tables; 24″ x 24″ x 30″ T-Slotted Tilt Table, S/N 4A4301 VIEW LOT #69A
  
• 16” x 36” Birmingham Geared Head Engine Lathe, 16″ Swing, 36″ Center Distance, 10” 3-Jaw Chuck, 3″ Hole Through Spindle, 16-2600-RPM, Saddle, Tool Post, Tailstock, Chip Pan, Steady Post, Work Light, S/N V048 VIEW LOT #73
  
• Armstrong-Blum Marvel Series 8 Vertical Band Saw, 25.5″ x 32″ Table, 18″ Throat, Traveling Tilt Saw Head, Chip Pan, S/N 821308  VIEW LOT #64
  
• Amada HFA250W Horizontal Band Saw, Semi-Automatic, 10″ Round Capacity, 1-1/4″ Blade, Hydraulic Clamping, Chip Pan; 12″ x 8″ Elevated Roller Infeed Table, Additional Roller Tables, S/N 250111 VIEW LOT #65
  
• Keiyo Seiki KG-1000 Geared Head Engine Lathe, 16″ Swing, 36″ Center to Center, 60 to 1500-RPM Thru Head Spindle, Saddle, Tool Post, Tail Stock, Chip Pan, 10″ Dia. 3-Jaw Chuck, S/N 5697 VIEW LOT #74
  
• Large Quantity Of: Tool Holders, Large Angle Plates, Tool Room Equipment, Welders, Inspection, Hand Tools, Power Tools, Benches, Transformers, Floor Scrubbers, Forklifts, Air Compressors, and Much More!