**ACCEPTING PRE-AUCTION OFFERS ON MAJOR MACHINES**

CNC PRESS BRAKE

• Accurpress 725024 CNC Press Brake, 250 Ton x 24’, 20’ Between Housings, 8” Stroke, 10” Throat, ETS Single Y-Axis Ram Control, 30 HP Main Motor, 24’ Lower Dies Holder, Safety Curtains, S/N: 6594, Mfg.Date: 12/2000

CNC SHEAR

• Accurshear 625020 Hydraulic Shear, ¼” x 20’ Rated Capacity Mild Steel, 36” Front Operated Back Gauge Range, Accurshear Back Gauge Control, Ball Transfers, 20’ Squaring Arm, 30 HP Main Motor, (2) 8’ Front Extensions, Pinnacle Systems Microguard Safety Light Curtain, S/N: 3918, Mfg. Date: 12/2000

PLATE BENDING ROLLS

• MG (EG Heller) AK 608 Hydraulic 3-Roll Double Pinch, 5/16” x 20’ Rated Rolling Capacity, ¼” x 20’ Rated Pre-Bend Capacity, 13.78” Top Roll Dia., 15 HP Main Motor, Operators Control Panel With Digital Roll Readouts, Powered Side Support, S/N: 2152, Mfg.Date: 2000
  
• Tennsmith Model S-R48P Power Slip Roll, 16 Gauge x 49” Rated Capacity, 3” Diameter Rolls, ¾ HP Main Motor, Foot Pedal, S/N: 16918
  

WELDING

• Migatronic Miga 5260 20’ Longitudinal Seam Welder, 20’ Long, 43” Min. Vessel Dia., Fronius RCU 2000 Weld Control, Fronius Plasma Module 10, Fronius TransTig 3000, Fronius KD 4000D-11 Wire Feed, S/N: 005060, Mfg. Date: 2000
• Ransome 99-11XT Welding Manipulator, 108” Max. Horizontal Boom Travel, 178” Max. Boom Height, 30’ Track Length, WeldLogic AWS 400N with Miller Coolmate 4, Pedestal Type Control, Ransome Tank Roll Sets With 1-Drive & 1-Idler on Track, S/N. 000702, Mfg.Date: 2000
  

SEAM WELD GRINDER

• G & P Machinery S-6746-F 24’ Longitudinal Seam Weld Grinder, (2) Grinding Heads Each with 3 HP Motors, Donaldson Torit TD 486 OD Dust Collector, S/N: G-12466, Mfg.Date: 2000
  

SHOP SUPPORT EQUIPMENT

• Caldwell Group 318-250 Posi-Turner Load Rotator & Positioner, 3000 LBS x 20’ Sling Span Capacity, S/N: 18010-1
  
• Caldwell Group 10LS-250 Posi-Turner Load Rotator & Positioner, 10,000 LBS x 20’ Sling Span Capacity, S/N: 18045-1
  
• Bushman Equipment Inc 624 C-Hook, 3000 Lbs. Rated Capacity, 20’ Maximum Width, Clearance height 8”, S/N: 22771, Mfg.Date: 11/2000
  
• Metal Muncher Model GB-100-18 Hydraulic Punch, 100 Ton Capacity, Max. Hole Thru Material 1-3/16 Tru 1”, 18” Throat, 9” Stroke, 11” x 48” Platen Table, 7.5 HP Main Motor, S/N: 011560198
  
• Hot Water Pressure Washer P200, NG Fuel Type, 545.000 BTU, 1800 PSI, 440 AC Volt, S/N: 78491
  
• Large Quantity of Shop Tables, Ransome Tank Turning Rolls; Fixtures, Carts; Assortment of Roller Tables, Roller Transfers, Anver Sheet Lifter