VIEW RIGGING INFORMATION

CNC HORIZONTAL BORING MILLS

• PAMA F/T 160 Ram Type Travelling Column 6.3” CNC Horizontal Boring Mill, Travels: X-472.44″, Y-125.98″, Z-1 35.43″ (Ram Travel), Z-2 35.43″ (Spl. Travel), Z1 & Z2 Combined Travel 70.86″, 16.53″ x 16.53″ Ram Cross Section, 6.3″ Spindle. Dia., 900 RPM, #50 Taper, 60-Station Automatic Tool Changer, Chip Conveyor  SOLD
• San Rocco Futura 14-34 Ram Type Traveling Column 5.5” CNC Horizontal Boring Mill, Travels: X-787.4″, Y-157.4″, Z-1 39.37″(Spindle Travel) , Z-2  39.37″(Ram Travel) , 13.4″ x 13.4″ Ram Cross Section, 5.51″ Spindle. Dia., #50 Taper , 12-1250 RPM, Automatic Tool Changer,  GE 1050 CNC Control, S/N 7100/1 VIEW LOT #42
  
• Toshiba Model BF-130A Traveling Column 5.12” CNC Horizontal Boring Mill, Travels: X-354″, Y-118″, Z-1 23.62″ (Spindle), Z-2 15.74″(Quill), 5.12” Spl. Diameter, # 50 Taper, 5–800 RPM, 40 HP, Toshiba BD 20/25 78.74″ x 98.42″ Infeeding B-Axis Rotary Table, Fanuc 15M CNC Control, S/N 123.834 VIEW LOT #37
  
• Alesa Monti AT-127 5” CNC Horizontal Boring Mill, Travels: X-59.05″, Y-39.37″, Z-19.68″, W-39.37″, 47″ x 59″ T-Slotted, 5″ Spindle Dia., ISO 50 Taper, 1750 rpm, 25 KW (33 HP) Spindle Motor. Heidenhain TNC 355 CNC Controls VIEW LOT #61

CNC VERTICAL BORING MILLS

• Pietro Carnaghi AC 25 98” CNC Vertical Boring Mill with Milling, 98” Dia., 4-Jaw Chuck, 118.11″ Max. Turning Dia, 88.58″ Max. Height Under Rail , 78.74″ Max. Turning Height, 49.21″ Ram Stroke, 9.44″ x 9.44″ Ram Cross-Section , 2–123 RPM (2 Ranges), 100 kW Table Motor , C-Axis .001° (Table Indexing) , ISO #50 Milling Spindle Taper, 0–1000 RPM Milling Spindle, 24 HP Milling Spindle Motor, Right Angle Head, 16-Station ATC, Heidenhain DRO, Siemens System 8 CNC Controls, S/N 832461 VIEW LOT #34
  
• New Century “CenturyTurn” 96” CNC Vertical Boring Mill, 96″ Table Diameter, 104″ Maximum Swing, 81″ Under Cross Rail, .9-50 RPM, Chip and Splash Guards, 75 HP Table Motor, 15-Station ATC, Fanuc 18i CNC Control,  Remanufactured In 2000, S/N 3200014720 VIEW LOT #59

CNC LATHES

• VDF Boehringer DUS 1000 TI CNC Lathe, 39.37″ Over Bed, 118″ Between Centers, 4-Position Sauter Horizontal Turret, 6.3-1600 RPM, Tailstock, 2-Steady Rests, Chip Conveyor, 37 kW Main Drive, Siemens CNC Control, SN 2042.6509-05 [2001] VIEW LOT #22
  
• VDF Boehringer 315 CM CNC Turning Center, 20.47″ Swing , 18.9″ Turning Diameter, 80″ Between Centers, 17.5″ 4-Jaw Chuck, 7-2800 RPM, C-Axis, Milling Speeds 20-2500 RPM, 12-Station Turret with 6-Live Tool Positions, Hydraulic Tailstock, 53 kW Main Drive, Chip Conveyor,  Siemens Sinumerik CNC Control, S/N 1117.7223-26 [2000] VIEW LOT #23
  
• VDF Boehringer DUS 560 TI CNC Lathe, 23” Swing, 73″ Between Centers, 14″ 4-Jaw Chuck, 17.5″ 4-Jaw Chuck, 3-2500 RPM, Tailstock, (2) Steady Rests, Chip Conveyor, Siemens Sinumerik CNC Control, S/N 2022-3734-03 VIEW LOT #24

MANUAL LATHES

• Giana Fratelli GFP-16 Manual Lathe, 78.74″ Swing, 157″ Between Centers, 55″ 4-Jaw Chuck, 6″ Bore, 2-200 RPM, Inch/Metric Threading, Steady Rest, Fagor DRO, Follow Rest, (2) Boring Bars Power Tailstock, 4-WayTool Post VIEW LOT #25
  
• TOS SU 125 Manual Lathe, 49.2″ Swing Over Bed, 157″ Between Centers, 47″ 4-Jaw Chuck, Tool Post , Fagor DRO, (2) Steady Rests, Follow Rest, 4″ Bore, 1.8-224 RPM, Inch/Metric Threading, Power Tailstock, Approx. 18 ft Bed, S/N 0429268 VIEW LOT #26

RADIAL DRILLS

• Novisa RTP 100 7 ft Radial Drill, Approx. 24″ Wide Column, Approx. 10 ft Height, 39″ x 105″ T-Slot Base, S/N 81959 VIEW LOT #29
  
• Novisa 6 ft Radial Drill, Approx. 18″ Wide Column, Approx. 9 ft Height, 34.5″ x 84″ T-Slot Base, S/N 67859 VIEW LOT #31
  

VERTICAL MACHINING CENTERS

• Enshu VMC 650 CNC Vertical Machining Center, Fanuc 15M Control, CAT 50 Spindle Taper, 30 ATC, S/N 293, Travels: X- 63″, Y- 25.5″, Z -26″, 63″ x 26″ Table, Max 4000 RPM [1989] VIEW LOT #27
  
• Caser CNC Vertical Machining Center, CAT 40, 30 ATC, 39.5″ x 78.5″ Table, Retrofit Siemens Control VIEW LOT #28
  

FORKLIFTS

• Komatsu FG25ST-11 Forklift, LPG, 4,970lbs Capacity, 3-Stage Mast VIEW LOT #71
  
• White Short-Mast Forklift, LPG, 2-Stage Mast VIEW LOT #72
  

ROTARY TABLES, FLOOR & ANGLE PLATES

• Toshiba BD 20/25 78.74″ x 98.42″ Infeeding B-Axis Rotary Table, Fanuc 15M CNC Controls VIEW LOT #38
  
• San Rocco 98.5″ x 118″ Infeeding B-Axis Rotary Table With 78.74″ Infeed, 48 Ton Weight Capacity VIEW LOT #43
  
• (2) PAMA TGN/2530 98.42″ x 118.11″ Infeeding CNC Rotary Tables, 40 Ton Weight Capacity, W-Axis 78.74″ Travel SOLD
  
• 189″ x 603″ T-Slotted Floor Plates Pad, Approx. (12) Sections of 153.5″ x 63″ Each VIEW LOT #44
  
• 158″ x 177″ x 16.25” T-Slotted Floor Plate, T-Slotted Floor Plate Pad consisting of (2) 78.75″ x 177″ x 16.25” Floor Plates SOLD
  
• Approx. 59″ x 118″  T-Slotted Floor Plate VIEW LOT #62
  
• (2) 4’ x 90″ x 15’ Angle Plates VIEW LOT #63
  
• (2) 39″ x 59″ x 118″ Angle Plates VIEW LOT #64
  

ADDITIONAL EQUIPMENT

• Sunnen Hone MBB-1660, S/N 14018, Includes Sunnen LM-650 Mandrel Storage Cabinet With Assorted Mandrels and Support Equipment VIEW LOT #9
  
• Grisetti RT/A 1000 Manual Grinder, Approx. 48″ Bed, Steady Rest, 1″ Bore, Tailstock, Rear Mounted Grinder Tool Post, S/N 1295 VIEW LOT #60
• Grob 4V-36 Vertical Band Saw, Blade Welder, 36″ Throat, S/N 1409 [1980] VIEW LOT #11
  
• First Mill Model LC 185 VSX Vertical Mill , 50″ x 10″ Table, Heidenhain DRO, Power Drawbar, 60-4500 RPM, 5 HP, S/N 10804710 VIEW LOT #32
  
• Lagun FU.1 Mill, Adjustable Right-Angle Head, 43″ x 10″ Table, Heidenhain Digital Readout, Speeds to 1800 RPM, S/N 12545 VIEW LOT #10
  
• King-Kong Industrial KSD 42H Universal Drilling Machine, Max 1800 RPM, Jacob Chuck, 12″ x 12″ Adjustable Table, S/N 6877 VIEW LOT #19
  
• TOS VS32 Drill Press, Jacob Chuck, 12″ x 16″ Table, S/N 680047 VIEW LOT #18
  
• PLUS: Large selection of Lista Cabinets, Welders, Box Tables, Right Angle Heads, Milling Heads & More!
  

RIGGING INFORMATION:

Redmond & Associates Industrial Machinery Movers
Contact: Tony Redmond
Phone: (905) 671-8800
[email protected]