Mitsubishi MV1200S CNC Wire EDM
 
Model: MV1200S Advance Type 800
Age: 2018
Ref#: 43702
Category: EDM, Wire Type
 
Specifications:
 
FEATURES:
D-Cubes CNC Control:
Hand Pendant Control:
Mitsubishi HE-SV50-W34 Unit Cooler:
Integral Dielectric Unit & Chiller:
Power Supply Cabinet:
 
CAPACITIES:
X-Axis Travel: 399 MM
Y-Axis Travel: 300 MM
Z-Axis: 221 MM
Maximum Workpiece Dimensions: 810 MM x 701 MM x 216 MM
Max. Submerged Workpiece Weight: 500 KG .
Table Dimensions: 640 MM x 450 MM
U/V Travels (From Center): ±2.4" x ±2.4"
Taper Angle @ Thickness: 15 Deg.203 MM
Wide Angle Taper: 45 Deg. 46 MM (No AT Possible)
Table Rapid Feed Speed: 1300 MM/MIN
Power Supply: V350-V
Minimum Drive Unit / Resolution: 0.000002 / 2 µin
User Program Storage [Hard Disk Size] . 1 GB [32 GB CFAST Card Size]:
Wire Diameter Possible: 0.004~0.012"
Minimum Start Hole Diameter: 1 MM
Max. Wire Spool Size On Machine: 10 KG .
Max. Wire Spool Size On Cabinet: 20 KG .
Filters / Type: 2 / Paper
Filter Tank Capacity: 145 Gallons
Machine System Dimensions: 79.7 x 2703 MM
Machine Installed Height: 2014 MM
Machine System Weight: 2700 KG .
Power Requirements: 200-230V
Compressed Air Requirements: 2.7 Cu. Ft./Min
 
Equipped With:
D-Cubes CNC Control
Hand Pendant Control
Mitsubishi HE-SV50-W34 Unit Cooler
Integral Dielectric Unit & Chiller
Power Supply Cabinet
LOCATION:
East Coast CNC Machining Facility
 
Print This Page    Back to Full Specs