World's Leading Provider of Used Machinery
63" x 393" Poreba TCG-160, Heavy Duty Manual Lathe w/40 Ton Capacity
Model: TCG-160 x 10M
Age:
Ref#: 32445
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
63" 4-Jaw Independent Chuck:
Inch/Metric Threading:
Power Tailstock:
100 HP Main Spindle Motor:
40 Ton Weight Capacity:
CAPACITY:
Maximum Swing Over Bedways: 62.99"
Maximum Swing Over Carriage: 50.39"
Distance Between Centers: 393.70"
Width Of Bed: 43.30"
Spindle Bore: 4.13"
Spindle Speeds (24): 1.6-200 RPM
Spindle Diameter of Front Bearing: 12.59"
Tailstock Quill Diameter: 11.02"
Tailstock Quill Travel: 7.87"
Tailstock Quill Taper: #6 MT
Weight Capcity Between Centers: 66,000 lbs
Weight Capacity With One Syeady Rest: 77,000 lbs
Weight Capacity With Two Steady Rest: 88,000 lbs
Equipped With:
63" 4-Jaw Independent Chuck
Heavy Duty Tool Post
Change Gears for Thread Cutting and Taper Turning (Set of 54 Gears)
Inch/Metric Threading
Pendant Station on Carriage
Hardened Ways
Power Tailstock Quill
Power Tailstock
100 HP Main Spindle Motor
(3) Steady Rests
NOTE:
Machine completely refurbished in 2015 with geometry set in 2021
SCOPE OF OVERHAUL:
Disassembly of all components (with cleaning)
Grinding of bed and carriage guideways
Inspection all major components (headstock, apron and tailstock)
Replacement of all used parts with the brand-new ones; all bearings, sleeves and nuts made of bronze, calibrations of screws and nuts, screws, drives, gears and clutches, installation of the new Metron on tailstock
Replacement of lubricating system with the new one
Installation of new electrical equipment in the cabinet, new wiring
Assembly of machine units after verification
Setting of machine geometry as per ISO 1708 standard
Technical acceptance including trials under load
New paint, installation of rating plates and anti-corrosion preservation
Print This Page Back to Full Specs
Model: TCG-160 x 10M
Age:
Ref#: 32445
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
63" 4-Jaw Independent Chuck:
Inch/Metric Threading:
Power Tailstock:
100 HP Main Spindle Motor:
40 Ton Weight Capacity:
CAPACITY:
Maximum Swing Over Bedways: 62.99"
Maximum Swing Over Carriage: 50.39"
Distance Between Centers: 393.70"
Width Of Bed: 43.30"
Spindle Bore: 4.13"
Spindle Speeds (24): 1.6-200 RPM
Spindle Diameter of Front Bearing: 12.59"
Tailstock Quill Diameter: 11.02"
Tailstock Quill Travel: 7.87"
Tailstock Quill Taper: #6 MT
Weight Capcity Between Centers: 66,000 lbs
Weight Capacity With One Syeady Rest: 77,000 lbs
Weight Capacity With Two Steady Rest: 88,000 lbs
Equipped With:
63" 4-Jaw Independent Chuck
Heavy Duty Tool Post
Change Gears for Thread Cutting and Taper Turning (Set of 54 Gears)
Inch/Metric Threading
Pendant Station on Carriage
Hardened Ways
Power Tailstock Quill
Power Tailstock
100 HP Main Spindle Motor
(3) Steady Rests
NOTE:
Machine completely refurbished in 2015 with geometry set in 2021
SCOPE OF OVERHAUL:
Disassembly of all components (with cleaning)
Grinding of bed and carriage guideways
Inspection all major components (headstock, apron and tailstock)
Replacement of all used parts with the brand-new ones; all bearings, sleeves and nuts made of bronze, calibrations of screws and nuts, screws, drives, gears and clutches, installation of the new Metron on tailstock
Replacement of lubricating system with the new one
Installation of new electrical equipment in the cabinet, new wiring
Assembly of machine units after verification
Setting of machine geometry as per ISO 1708 standard
Technical acceptance including trials under load
New paint, installation of rating plates and anti-corrosion preservation
Print This Page Back to Full Specs
