World's Leading Provider of Used Machinery
Poreba TCG-200 x 14M Heavy Duty Conventional Lathe
Model: TCG-200/14M
Age: 1986
Ref#: 32414
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
New Electrics 2024:
1600 MM 4-Jaw Independent Chuck:
75 KW Main Motor:
Inch/Metric Threading:
29937 KG Unsupported Weight Capacity:
CAPACITY:
Maximum Swing Over Bedways: 2000 MM
Maximum Swing Over Carriage: 1680 MM
Distance Between Centers: 14000 MM
Spindle Speeds: 0.8-160 RPM
Spindle Speeds, Number: 24
Spindle Speed Ranges: 3
Spindle Bore: 105 MM
Spindle Torque, Maximum: 63,000 Nm
Width of Bed: 1500 MM
Longitudinal Feed Rates: 0.007-6.29 IPR
Overall Feed Rates: 331 MM/MIN
Rapid Traverse: 4000 MM/MIN
Threading, Metric: 1-192 MM
Threading, Inch: .125-30 TPI
Front Bearing Diameter: 320 MM
Tailstock Diameter: 280 MM
Tailstock Quill Travel: 200 MM
Tailstock Quill Rapid Traverse: 300 MM/MIN
Tailstock Rapid Traverse On Bed: 1500 MM/MIN
Weight Capacity Between Centers: 29937 KG
Weight Capacity with One Steady Rest: 34927 KG
Weight Capacity with Two Steady Rest: 39916 KG
Equipped With:
1600 MM 4-Jaw Independent Chuck
Operator Controls On Carriage
Inch/Metric Threading
Power Compound
6-Way Power Rapid Traverse
(1) 250 MM - 599 MM Roller Type Steady Rest
(1) 700 MM - 1100 MM Roller Type Steady Rest
Power Tailstock and Quill
Hardened & Ground Replaceable Bedways
Hardened and Ground Gears & Spline Shafts
Heavy Duty Meehanite Casting
75 KW Main Drive 440 Volt
NOTE:
New Electrics 2024
NOTE:
Delivery 7 Months From Order
Refurbished:
new cable conveyor (Kabelschlepp) for the apron and tailstock) the conveyors must be new,
new paiting, green (RAL 6011)
1 set of leveling pads (no foundation bolts)
cleaning all units of the lathe (headstock, apron, tailstock, carriage and bed),
new bronze worm and bearing on this axis for the apron
1 set of new V belts,
new cross spindle and nuts and new spindels for top slide,
new bearings on the tailstock spindle in 5 class,
centers 60 deg. for the headstock and tailstock,
new electrical cabinet with new equipment with 460V transformer in the cabinet
new wires between cabinet and machine,
new wipers for the cariagge and tailstock,
geomerty acc. ISO 1708
Print This Page Back to Full Specs
Model: TCG-200/14M
Age: 1986
Ref#: 32414
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
New Electrics 2024:
1600 MM 4-Jaw Independent Chuck:
75 KW Main Motor:
Inch/Metric Threading:
29937 KG Unsupported Weight Capacity:
CAPACITY:
Maximum Swing Over Bedways: 2000 MM
Maximum Swing Over Carriage: 1680 MM
Distance Between Centers: 14000 MM
Spindle Speeds: 0.8-160 RPM
Spindle Speeds, Number: 24
Spindle Speed Ranges: 3
Spindle Bore: 105 MM
Spindle Torque, Maximum: 63,000 Nm
Width of Bed: 1500 MM
Longitudinal Feed Rates: 0.007-6.29 IPR
Overall Feed Rates: 331 MM/MIN
Rapid Traverse: 4000 MM/MIN
Threading, Metric: 1-192 MM
Threading, Inch: .125-30 TPI
Front Bearing Diameter: 320 MM
Tailstock Diameter: 280 MM
Tailstock Quill Travel: 200 MM
Tailstock Quill Rapid Traverse: 300 MM/MIN
Tailstock Rapid Traverse On Bed: 1500 MM/MIN
Weight Capacity Between Centers: 29937 KG
Weight Capacity with One Steady Rest: 34927 KG
Weight Capacity with Two Steady Rest: 39916 KG
Equipped With:
1600 MM 4-Jaw Independent Chuck
Operator Controls On Carriage
Inch/Metric Threading
Power Compound
6-Way Power Rapid Traverse
(1) 250 MM - 599 MM Roller Type Steady Rest
(1) 700 MM - 1100 MM Roller Type Steady Rest
Power Tailstock and Quill
Hardened & Ground Replaceable Bedways
Hardened and Ground Gears & Spline Shafts
Heavy Duty Meehanite Casting
75 KW Main Drive 440 Volt
NOTE:
New Electrics 2024
NOTE:
Delivery 7 Months From Order
Refurbished:
new cable conveyor (Kabelschlepp) for the apron and tailstock) the conveyors must be new,
new paiting, green (RAL 6011)
1 set of leveling pads (no foundation bolts)
cleaning all units of the lathe (headstock, apron, tailstock, carriage and bed),
new bronze worm and bearing on this axis for the apron
1 set of new V belts,
new cross spindle and nuts and new spindels for top slide,
new bearings on the tailstock spindle in 5 class,
centers 60 deg. for the headstock and tailstock,
new electrical cabinet with new equipment with 460V transformer in the cabinet
new wires between cabinet and machine,
new wipers for the cariagge and tailstock,
geomerty acc. ISO 1708
Print This Page Back to Full Specs
