World's Leading Provider of Used Machinery
Poreba TCG-200 x 14M Heavy Duty Conventional Lathe
Model: TCG-200/14M
Age: 1986
Ref#: 32414
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
New Electrics 2024:
63" 4-Jaw Independent Chuck:
100 HP Main Motor:
Inch/Metric Threading:
66,000 Lbs Unsupported Weight Capacity:
CAPACITY:
Maximum Swing Over Bedways: 78.74"
Maximum Swing Over Carriage: 66.14"
Distance Between Centers: 551.18"
Spindle Speeds: 0.8-160 RPM
Spindle Speeds, Number: 24
Spindle Speed Ranges: 3
Spindle Bore: 4.13"
Spindle Torque, Maximum: 63,000 Nm
Width of Bed: 59.05"
Longitudinal Feed Rates: 0.007-6.29 IPR
Overall Feed Rates: 0.44-12.59 IPM
Rapid Traverse: 157.48 IPM
Threading, Metric: 1-192 MM
Threading, Inch: .125-30 TPI
Front Bearing Diameter: 12.59"
Tailstock Diameter: 11.02"
Tailstock Quill Travel: 7.87"
Tailstock Quill Rapid Traverse: 11.81 IPM
Tailstock Rapid Traverse On Bed: 59.05 IPM
Weight Capacity Between Centers: 66,000 Lbs
Weight Capacity with One Steady Rest: 77,000 Lbs
Weight Capacity with Two Steady Rest: 88,000 Lbs
Equipped With:
63" 4-Jaw Independent Chuck
Operator Controls On Carriage
Inch/Metric Threading
Power Compound
6-Way Power Rapid Traverse
(1) 9.84" - 23.6" Roller Type Steady Rest
(1) 27.55" - 43.3" Roller Type Steady Rest
Power Tailstock and Quill
Hardened & Ground Replaceable Bedways
Hardened and Ground Gears & Spline Shafts
Heavy Duty Meehanite Casting
100 HP Main Drive 440 Volt
NOTE:
New Electrics 2024
NOTE:
Delivery 7 Months From Order
Refurbished:
new cable conveyor (Kabelschlepp) for the apron and tailstock) the conveyors must be new,
new paiting, green (RAL 6011)
1 set of leveling pads (no foundation bolts)
cleaning all units of the lathe (headstock, apron, tailstock, carriage and bed),
new bronze worm and bearing on this axis for the apron
1 set of new V belts,
new cross spindle and nuts and new spindels for top slide,
new bearings on the tailstock spindle in 5 class,
centers 60 deg. for the headstock and tailstock,
new electrical cabinet with new equipment with 460V transformer in the cabinet
new wires between cabinet and machine,
new wipers for the cariagge and tailstock,
geomerty acc. ISO 1708
Print This Page Back to Full Specs
Model: TCG-200/14M
Age: 1986
Ref#: 32414
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
New Electrics 2024:
63" 4-Jaw Independent Chuck:
100 HP Main Motor:
Inch/Metric Threading:
66,000 Lbs Unsupported Weight Capacity:
CAPACITY:
Maximum Swing Over Bedways: 78.74"
Maximum Swing Over Carriage: 66.14"
Distance Between Centers: 551.18"
Spindle Speeds: 0.8-160 RPM
Spindle Speeds, Number: 24
Spindle Speed Ranges: 3
Spindle Bore: 4.13"
Spindle Torque, Maximum: 63,000 Nm
Width of Bed: 59.05"
Longitudinal Feed Rates: 0.007-6.29 IPR
Overall Feed Rates: 0.44-12.59 IPM
Rapid Traverse: 157.48 IPM
Threading, Metric: 1-192 MM
Threading, Inch: .125-30 TPI
Front Bearing Diameter: 12.59"
Tailstock Diameter: 11.02"
Tailstock Quill Travel: 7.87"
Tailstock Quill Rapid Traverse: 11.81 IPM
Tailstock Rapid Traverse On Bed: 59.05 IPM
Weight Capacity Between Centers: 66,000 Lbs
Weight Capacity with One Steady Rest: 77,000 Lbs
Weight Capacity with Two Steady Rest: 88,000 Lbs
Equipped With:
63" 4-Jaw Independent Chuck
Operator Controls On Carriage
Inch/Metric Threading
Power Compound
6-Way Power Rapid Traverse
(1) 9.84" - 23.6" Roller Type Steady Rest
(1) 27.55" - 43.3" Roller Type Steady Rest
Power Tailstock and Quill
Hardened & Ground Replaceable Bedways
Hardened and Ground Gears & Spline Shafts
Heavy Duty Meehanite Casting
100 HP Main Drive 440 Volt
NOTE:
New Electrics 2024
NOTE:
Delivery 7 Months From Order
Refurbished:
new cable conveyor (Kabelschlepp) for the apron and tailstock) the conveyors must be new,
new paiting, green (RAL 6011)
1 set of leveling pads (no foundation bolts)
cleaning all units of the lathe (headstock, apron, tailstock, carriage and bed),
new bronze worm and bearing on this axis for the apron
1 set of new V belts,
new cross spindle and nuts and new spindels for top slide,
new bearings on the tailstock spindle in 5 class,
centers 60 deg. for the headstock and tailstock,
new electrical cabinet with new equipment with 460V transformer in the cabinet
new wires between cabinet and machine,
new wipers for the cariagge and tailstock,
geomerty acc. ISO 1708
Print This Page Back to Full Specs
