World's Leading Provider of Used Machinery
Mitsubishi MAF 280/210 210 MM Floor Type Horizontal Boring Mill
Model: MAF 280/210 NC
Age: 2010 ®
Ref#: 32218
Category: Boring Mills, Horizontal, Floor Type, CNC
Specifications:
FEATURES:
Siemens 840D Solutionline CNC Control - Retrofit 2010:
Universal Milling Head:
Surface Facing Head, U-Axis:
Long Reach Milling Attachment: #50 Taper, 1200 RPM:
2800 RPM Auxiliary Spindle:
Through Spindle Coolant:
SPECIFICATIONS:
Spindle Diameter: 210 MM
Column Travel, X-Axis: 12500 MM
Headstock Vertical Travel, Y-Axis: 6000 MM
Main Spindle Horiz Travel, Z-Axis: 1300 MM
Ramstock, Travel, W-Axis: 1000 MM
Combined Travel Z & W Axis: 2297 MM
Auxillary Spindle, C-Axis: 500 MM
Ramstock, Travel, W-Axis: 1000 MM
Combined Travel C & W Axis: 1500 MM
Main Spindle Speeds, Z-Axis: 3-600 RPM
Auxillary Spindle Speeds, C-Axis: 75-2800 RPM
High Speed Shaft For Attachments: 7-2500 RPM
Front Plate Dimensions: 805 MM x 1075 MM
Rapid Traverse X,Y,Z Axes: 5000 MM/MIN
Feed Rate: 4001 MM/MIN
HEADSTOCK:
Main Spindle, Z-Axis::
Boring Spindle Diameter: 210 MM
Milling Spindle Diameter: 310 MM
Spindle Taper: #60 ANSI
Spindle Travel, Z-Axis: 1300 MM
Speeds: 3-600 RPM
Spindle Motor: 75 KW / 89 KW
Auxillary Spindle, C-Axis::
Spindle Diameter: 280 MM
Spindle Taper: #60 ANSI
Spindle Travel: 500 MM
Spindle Speeds: 75-2800 RPM
Maximum Thrust: 2994 KG
Spindle Motor: 15 KW
Coolant Thru Spindle: Yes
DESCRIPTION OF AXES:
Column Travel: X-Axis
Spindle Vertical: Y-Axis
Main Spindle In & Out: Z-Axis
Auxilliary Spindle In & Out: C-Axis
Surfacing Slide: U-Axis
Headstock In & Out: W-Axis
Equipped With:
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-1067 MM Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
New Spare Spindle & Bearings Available
2-Ton Jib Crane For Loading Attachments
75 KW / 89 KW Main Spindle Motor
NOTE:
Machine Was Built New in 603.5 M s and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010.
Print This Page Back to Full Specs
Model: MAF 280/210 NC
Age: 2010 ®
Ref#: 32218
Category: Boring Mills, Horizontal, Floor Type, CNC
Specifications:
FEATURES:
Siemens 840D Solutionline CNC Control - Retrofit 2010:
Universal Milling Head:
Surface Facing Head, U-Axis:
Long Reach Milling Attachment: #50 Taper, 1200 RPM:
2800 RPM Auxiliary Spindle:
Through Spindle Coolant:
SPECIFICATIONS:
Spindle Diameter: 210 MM
Column Travel, X-Axis: 12500 MM
Headstock Vertical Travel, Y-Axis: 6000 MM
Main Spindle Horiz Travel, Z-Axis: 1300 MM
Ramstock, Travel, W-Axis: 1000 MM
Combined Travel Z & W Axis: 2297 MM
Auxillary Spindle, C-Axis: 500 MM
Ramstock, Travel, W-Axis: 1000 MM
Combined Travel C & W Axis: 1500 MM
Main Spindle Speeds, Z-Axis: 3-600 RPM
Auxillary Spindle Speeds, C-Axis: 75-2800 RPM
High Speed Shaft For Attachments: 7-2500 RPM
Front Plate Dimensions: 805 MM x 1075 MM
Rapid Traverse X,Y,Z Axes: 5000 MM/MIN
Feed Rate: 4001 MM/MIN
HEADSTOCK:
Main Spindle, Z-Axis::
Boring Spindle Diameter: 210 MM
Milling Spindle Diameter: 310 MM
Spindle Taper: #60 ANSI
Spindle Travel, Z-Axis: 1300 MM
Speeds: 3-600 RPM
Spindle Motor: 75 KW / 89 KW
Auxillary Spindle, C-Axis::
Spindle Diameter: 280 MM
Spindle Taper: #60 ANSI
Spindle Travel: 500 MM
Spindle Speeds: 75-2800 RPM
Maximum Thrust: 2994 KG
Spindle Motor: 15 KW
Coolant Thru Spindle: Yes
DESCRIPTION OF AXES:
Column Travel: X-Axis
Spindle Vertical: Y-Axis
Main Spindle In & Out: Z-Axis
Auxilliary Spindle In & Out: C-Axis
Surfacing Slide: U-Axis
Headstock In & Out: W-Axis
Equipped With:
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-1067 MM Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
New Spare Spindle & Bearings Available
2-Ton Jib Crane For Loading Attachments
75 KW / 89 KW Main Spindle Motor
NOTE:
Machine Was Built New in 603.5 M s and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010.
Print This Page Back to Full Specs
