World's Leading Provider of Used Machinery
Mitsubishi MAF 280/210 8.26" Floor Type Horizontal Boring Mill
Model: MAF 280/210 NC
Age: 2010 ®
Ref#: 32218
Category: Boring Mills, Horizontal, Floor Type, CNC
Specifications:
FEATURES:
Siemens 840D Solutionline CNC Control - Retrofit 2010:
Universal Milling Head:
Surface Facing Head, U-Axis:
Long Reach Milling Attachment: #50 Taper, 1200 RPM:
2800 RPM Auxiliary Spindle:
Through Spindle Coolant:
SPECIFICATIONS:
Spindle Diameter: 8.27"
Column Travel, X-Axis: 492.12"
Headstock Vertical Travel, Y-Axis: 236.22"
Main Spindle Horiz Travel, Z-Axis: 51.18"
Ramstock, Travel, W-Axis: 39.37"
Combined Travel Z & W Axis: 90.45"
Auxillary Spindle, C-Axis: 19.68"
Ramstock, Travel, W-Axis: 39.37"
Combined Travel C & W Axis: 59.05"
Main Spindle Speeds, Z-Axis: 3-600 RPM
Auxillary Spindle Speeds, C-Axis: 75-2800 RPM
High Speed Shaft For Attachments: 7-2500 RPM
Front Plate Dimensions: 31.69" x 42.32"
Rapid Traverse X,Y,Z Axes: 196.85 IPM
Feed Rate: 0.04-157.48 IPM
HEADSTOCK:
Main Spindle, Z-Axis::
Boring Spindle Diameter: 8.26"
Milling Spindle Diameter: 12.20"
Spindle Taper: #60 ANSI
Spindle Travel, Z-Axis: 51.18"
Speeds: 3-600 RPM
Spindle Motor: 100 HP/ 120 HP
Auxillary Spindle, C-Axis::
Spindle Diameter: 11.02"
Spindle Taper: #60 ANSI
Spindle Travel: 19.68"
Spindle Speeds: 75-2800 RPM
Maximum Thrust: 6,600 Lbs
Spindle Motor: 20 HP
Coolant Thru Spindle: Yes
DESCRIPTION OF AXES:
Column Travel: X-Axis
Spindle Vertical: Y-Axis
Main Spindle In & Out: Z-Axis
Auxilliary Spindle In & Out: C-Axis
Surfacing Slide: U-Axis
Headstock In & Out: W-Axis
Equipped With:
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-40, 42" Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
New Spare Spindle & Bearings Available
2-Ton Jib Crane For Loading Attachments
100 HP / 120 HP Main Spindle Motor
NOTE:
Machine Was Built New in 1980's and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010. Inspect In Our Philadelphia PA Warehouse
Print This Page Back to Full Specs
Model: MAF 280/210 NC
Age: 2010 ®
Ref#: 32218
Category: Boring Mills, Horizontal, Floor Type, CNC
Specifications:
FEATURES:
Siemens 840D Solutionline CNC Control - Retrofit 2010:
Universal Milling Head:
Surface Facing Head, U-Axis:
Long Reach Milling Attachment: #50 Taper, 1200 RPM:
2800 RPM Auxiliary Spindle:
Through Spindle Coolant:
SPECIFICATIONS:
Spindle Diameter: 8.27"
Column Travel, X-Axis: 492.12"
Headstock Vertical Travel, Y-Axis: 236.22"
Main Spindle Horiz Travel, Z-Axis: 51.18"
Ramstock, Travel, W-Axis: 39.37"
Combined Travel Z & W Axis: 90.45"
Auxillary Spindle, C-Axis: 19.68"
Ramstock, Travel, W-Axis: 39.37"
Combined Travel C & W Axis: 59.05"
Main Spindle Speeds, Z-Axis: 3-600 RPM
Auxillary Spindle Speeds, C-Axis: 75-2800 RPM
High Speed Shaft For Attachments: 7-2500 RPM
Front Plate Dimensions: 31.69" x 42.32"
Rapid Traverse X,Y,Z Axes: 196.85 IPM
Feed Rate: 0.04-157.48 IPM
HEADSTOCK:
Main Spindle, Z-Axis::
Boring Spindle Diameter: 8.26"
Milling Spindle Diameter: 12.20"
Spindle Taper: #60 ANSI
Spindle Travel, Z-Axis: 51.18"
Speeds: 3-600 RPM
Spindle Motor: 100 HP/ 120 HP
Auxillary Spindle, C-Axis::
Spindle Diameter: 11.02"
Spindle Taper: #60 ANSI
Spindle Travel: 19.68"
Spindle Speeds: 75-2800 RPM
Maximum Thrust: 6,600 Lbs
Spindle Motor: 20 HP
Coolant Thru Spindle: Yes
DESCRIPTION OF AXES:
Column Travel: X-Axis
Spindle Vertical: Y-Axis
Main Spindle In & Out: Z-Axis
Auxilliary Spindle In & Out: C-Axis
Surfacing Slide: U-Axis
Headstock In & Out: W-Axis
Equipped With:
Siemens 840D Solution Line CNC Control (Retrofit 2010)
2800 RPM Auxillary Spindle
Through Spindle Coolant
Long Reach Milling Attachment: #50 Taper, 1200 RPM
Universal Milling Head, Model UHM-40, 42" Reach
Facing Head, Surfacing Slide, Model SHM-2000 U-Axis
Full Length Chip Conveyor
New Spare Spindle & Bearings Available
2-Ton Jib Crane For Loading Attachments
100 HP / 120 HP Main Spindle Motor
NOTE:
Machine Was Built New in 1980's and Installed In USA Government Facility. Partially Rebuilt and Retrofit with New Siemens 840D CNC Controls in 2010. Inspect In Our Philadelphia PA Warehouse
Print This Page Back to Full Specs
