Craven 3226 MM x 9144 MM Heavy Duty 4-Axis CNC Lathe, Retrofit 2010
 
Model: Heavy Duty
Age: 2010 ®
Ref#: 28376
Category: Lathes, Flat Bed, Manual & CNC
 
Specifications:
 
FEATURES:
Fanuc 0i-TC CNC Control (Retrofitted 2010):
1905 MM 4-Jaw Chuck With 4-Top Jaws:
4-Way Bed Construction:
2-Carriages:
521 MM Head & Tailstock Risers:
New Drive Nut & Drive Motor On Rear Center (2015):
New Side Rail On Main Carriage (2015):
New Roller Bearings In Headstock In 2005:
New Lubrication System, New Pump, Relay Wire, Wirings & Fittings (2005):
 
CAPACITY:
Maximum Swing Over Bedways: 3226 MM
Maximum Swing Over Carriage: 2235 MM
Distance Between Centers: 9144 MM
Overall Length Of Bed: 13716 MM
Width Of Bedways: 2286 MM
Maximum Spindle Speed: 62 RPM
Maximum Work Piece Weight: 49966 KG
Maximum Work Piece Weight, 1-Steady: 79946 KG
Main Motor Power: 56 KW
Approximate Floor Space Required: 17704 MM L x 3353 MM W
Approximate Overall Weight Of Machine.. 81647 KG: 81647 KG
 
Equipped With:
Fanuc 0i-TC CNC Control (Retrofitted 2010)
Operators Remote Pendant
1905 MM 4-Jaw Chuck With 4-Top Jaws
2-Carriages, Front & Rear
4-Way Bed Construction
Front Carriage With Fanuc Red Cap Servo Motors On Cross Slide & Tool Post
Rear Carriage With Master Setco Servo Slide & Tool Post
Heidenhain Scales
Powered Tailstock, Sits On Center Bedways
New Drive Nut & Drive Motor On Rear Center (2015)
New Side Rail On Main Carriage (2015)
New Roller Bearings In Headstock In 2005
New Lubrication System, New Pump, Relay Wire, Wirings & Fittings (2005)
(2) 254 MM - 610 MM Roller Steady Rests (New 1999)
(2) Work Rests
521 MM Head & Tailstock Risers
(1) Indexable Tooling Riser
(1) Solid Tooling Riser
Threading
56 KW Main Drive Motor
NOTE:
Inspect In Plant Under Power
 
Print This Page    Back to Full Specs