World's Leading Provider of Used Machinery
WELTER Model UHT-800 CNC Universal Bevel Gear Checker
Model: UHT-800
Age: 2009
Ref#: 26863
Category: Gear Testers
Specifications:
SPECIFICATION:
Maximum Gear Diameter: 31.5"
Shaft Angle Between The 2 Spindles: 45-180 Degrees
Distance, Pinion Face To Center: 8.3"-22.45"
Distance, Spindle Face To Center: 0-19.68"
Driving Headstock Horiz. Movement: 2.362" Forward
Driving Headstock Horiz. Movement: 7.086" Backward
Maximum Hypoid Offset: 4.53"
Diameter, Pinion Spindle Bore: 6" (60 Taper)
Taper Of Pinion: 60 Taper
Spindle Speed Pinion Headstock: 0-200 RPM
Spindle Speeds: 1000 RPM / 500 RPM
Main Spindle Motors, S1/S6: 5 HP / 6 HP
Floor Space L x W x H: 145" x 106" x 78.74"
Approx. Weight: 24,200 Lbs.
CNC CONTROL:
Geartec CZ 4-Axis CNC Control For Pinion MD, Gear MD, Sliding Base, Pinion:
Offset:
BASIC SINGLE FLANK SOFTWARE:
Single Flank Inspection With FFT Analysis:
Interface Software For Digital Tooth Contact Display Of Inspection Result:
With A Digital Camera:
FULLY AUTOMATED SINGLE FLANK OPERATION:
Auto Stock Dividing Using Non-Contact Sensing System To Detect Tooth Gap:
Automatic Or Foot Actuated Clamping Of The Pinion Or Gear:
Automatic Positioning To Pre-Determined Baclash:
Best Backlash Positioning Based On Single Flank Running Characteristics:
Automatic Programming Of Single Flank Test Cycles:
Auto Movement To Pre-Determined Position For Bearing Pattern Inspection For:
Digital Image Capture:
Digital Image Capture With Automatic Storage Of The Image With The Single:
Flank Data Inspection Report:
AUTOMATED FUNCTIONS:
The Operator Brings Gear And Pinion Manually To The Machine Or Robot:
Automatic Or Manual Clamping Of The Pinion And Gear:
Automatic Find Correct Position Of Tooth Gap By Non-Contact Position Sensors:
Inspection Of Angular Position Of Gear And Automatic Position Of Respective:
Axes:
Automatic Approach To Pre-Determined Backlash.:
Automatic Cycle Start Of Single Flank Inspection For Respective Positions:
Automatic Machine Movements To Test Pattern Position For Bearing Pattern:
Inspection For Digital Imaging Capture:
Digital Image Capture Of Contract Pattern & Automatic Saving Of Digital:
Imate To The Test File:
Print This Page Back to Full Specs
Model: UHT-800
Age: 2009
Ref#: 26863
Category: Gear Testers
Specifications:
SPECIFICATION:
Maximum Gear Diameter: 31.5"
Shaft Angle Between The 2 Spindles: 45-180 Degrees
Distance, Pinion Face To Center: 8.3"-22.45"
Distance, Spindle Face To Center: 0-19.68"
Driving Headstock Horiz. Movement: 2.362" Forward
Driving Headstock Horiz. Movement: 7.086" Backward
Maximum Hypoid Offset: 4.53"
Diameter, Pinion Spindle Bore: 6" (60 Taper)
Taper Of Pinion: 60 Taper
Spindle Speed Pinion Headstock: 0-200 RPM
Spindle Speeds: 1000 RPM / 500 RPM
Main Spindle Motors, S1/S6: 5 HP / 6 HP
Floor Space L x W x H: 145" x 106" x 78.74"
Approx. Weight: 24,200 Lbs.
CNC CONTROL:
Geartec CZ 4-Axis CNC Control For Pinion MD, Gear MD, Sliding Base, Pinion:
Offset:
BASIC SINGLE FLANK SOFTWARE:
Single Flank Inspection With FFT Analysis:
Interface Software For Digital Tooth Contact Display Of Inspection Result:
With A Digital Camera:
FULLY AUTOMATED SINGLE FLANK OPERATION:
Auto Stock Dividing Using Non-Contact Sensing System To Detect Tooth Gap:
Automatic Or Foot Actuated Clamping Of The Pinion Or Gear:
Automatic Positioning To Pre-Determined Baclash:
Best Backlash Positioning Based On Single Flank Running Characteristics:
Automatic Programming Of Single Flank Test Cycles:
Auto Movement To Pre-Determined Position For Bearing Pattern Inspection For:
Digital Image Capture:
Digital Image Capture With Automatic Storage Of The Image With The Single:
Flank Data Inspection Report:
AUTOMATED FUNCTIONS:
The Operator Brings Gear And Pinion Manually To The Machine Or Robot:
Automatic Or Manual Clamping Of The Pinion And Gear:
Automatic Find Correct Position Of Tooth Gap By Non-Contact Position Sensors:
Inspection Of Angular Position Of Gear And Automatic Position Of Respective:
Axes:
Automatic Approach To Pre-Determined Backlash.:
Automatic Cycle Start Of Single Flank Inspection For Respective Positions:
Automatic Machine Movements To Test Pattern Position For Bearing Pattern:
Inspection For Digital Imaging Capture:
Digital Image Capture Of Contract Pattern & Automatic Saving Of Digital:
Imate To The Test File:
Print This Page Back to Full Specs
