SALE DATE: WEDNESDAY, APRIL 20TH, 2022 | 1:00PM ET

INSPECTION DATE: TUESDAY, APRIL 19TH, 2022 | 9:00AM – 3:00PM ET

CONTACT: PAUL LASHIN, 631-249-5566, [email protected]

** PRE-AUCTION OFFERS ARE INVITED **

FEATURED ASSETS:

CNC VERTICAL MACHINING CENTERS:

• 2007 Fadal VMC 15 CNC Vertical Machining Center, Travels: X-20″, Y-16″, Z-20″, Table Size: 29″ x 16″, 21-Position Automatic Tool Changer, 750 Lb. Table Capacity, 75-7500 RPM Spindle Speed, 400 IPM Rapid Traverse Rate, 15” Max. Tool Length, Fadal 88HS CNC Control, S/N 032007019559
• 2004 Fadal VMC-4020A HT CNC Vertical Machining Center, Travels: X-40″, Y-20″, Z-20″, Table Size: 48″ x 20″, 24-Position Side-Mounted Automatic Tool Changer, CAT 40 Taper, 7500 RPM, Fadal Multi-Processor CNC Control, S/N 012004096769
• Fadal VMC 3016L CNC Vertical Machining Center, Model 904-1L, Travels: X-30″, Y-16″, Z-20″, Table Size: 39” x 16”, 21-Position Automatic Tool Changer, CAT 40 Taper, 2736 Lb. Table Load Capacity, 15 HP Spindle Motor, 900 IPM Rapid Feed Rate, 230/440/3/60, Fadal 88HS CNC Control, S/N 9711829

• Fadal VMC-2016L CNC Vertical Machining Center, Model 914/904-1L, Travels: X-30″, Y-16″, Z-20″, Table Size: 30″ x 16″, 21-Position Automatic Tool Changer, CAT 40 Taper, 15 HP Motor, 900 IPM Rapid Feed, 230/440/3/60, Fadal 88HS CNC Control, Coolant, S/N 9909206
• Fadal VMC-15RT CNC Vertical Machining Center, Model 914-15, Travels: X-20″, Y-16″, Z-16″, Table Size: 29″ x 16″, 2,000 Lb. Max Table Load, 21-Position Automatic Tool Changer, CAT 40 Taper, 7,500 RPM Spindle Speed, 10 HP Spindle Motor, 375 IPM Cutting Feed Rate, 400 IPM Rapid Traverse, 230/440/3/60, Fadal 88HS CNC Control, S/N 9512558
• Fadal VMC-15RT CNC Vertical Machining Center, Model 914-15, Travels: X-20″, Y-16″, Z-16″, Table Size: 29″ x 16″, 2,000 Lb. Max Table Load, 21-Position Automatic Tool Changer, CAT 40 Taper, 7,500 RPM Spindle Speed, 10 HP Spindle Motor, 375 IPM Cutting Feed Rate, 400 IPM Rapid Traverse, 230/440/3/60, Fadal 88HS CNC Control, S/N 9505828

• Fadal VMC-15RT CNC Vertical Machining Center, Model 914-15, Travels: X-20″, Y-16″, Z-16″, Table Size: 29″ x 16″, 2,000 Lb. Max Table Load, 21-Position Automatic Tool Changer, 7,500 RPM, 10 HP Spindle Motor, 375 IPM Cutting Feed Rate, 400 IPM Rapid Traverse,230/440/3/60, Fadal 88HS CNC Control, S/N 9707520

ROTARY INDEXERS:

• (3) Haas HA-5C Rotary Indexers with Tailstocks, 45 Ft.-LBS. Brush Torque, 0.0004 Runout Max., 0.001 To 270 Speeds, 2-3/16”-10” Collets, 4.000+0.001 Spindle Centers, 5 HP Drive DC Servo, 120 V, 1 Ph, 50-60 Hz, (S/N 932488, S/N. 932489, S/N. 932490)

CNC LATHES & TURNING CENTERS:

• Daewoo Lynx 200A CNC Lathe, Fanuc Series 21i-T CNC Control, 18″ Swing Over Bed, 13″ Swing Over Cross Slide, 7.1″ Turning Diameter, 11.8″ Max. Turning Length, 6.5″ X-Axis Travel, 13″ Z-Axis Travel, 1.75” Bar Capacity, Equipped with Collet Nose, Tool Eye, 12-Station Turret, 10 HP Motor, Tailstock, X-787 IPM, Z-950 IPM Rapids, 220/3/60, S/N L2001640
• Dainichi BX-45 CNC Slant Bed Lathe, 15″ Turning Diameter, 24″ Turning Length, 2″ Spindle Bore, 3500 RPM, Equipped With 10” 3-Jaw Chuck, 10-Position Turret, 20 HP Motor, Chip Conveyor, Fanuc 10T CNC Control, S/N 22654
• Mori Seiki SL-20 CNC Slant Bed Lathe, 17.71″ Swing Over Bed, 8.3″ Max. Turning Dia., 20.51″ Max. Turning Length, 4500 RPM, Equipped With 8″ 3-Jaw Chuck, Tool Eye, 10-Position Turret, Tailstock, Chip Conveyor, Fanuc 10T CNC Control, S/N 615
• Mori Seiki SL-15 CNC Slant Bed Lathe, 17.7″ Swing Over Bed, 9.06″ Turning Diameter, 1.77″ Bar Capacity, 6000 RPM, 5.5 HP Motor, Equipped With 6″ 3-Jaw Chuck, 12-Position Turret, Tailstock, Fanuc 10T CNC Control, S/N 52
• Mori Seiki SL-1A CNC Slant Bed CNC Lathe, 5.91″ Max. Workpiece Diameter, 12.4″ Distance Between Centers, Equipped With 6” 3-Jaw Chuck, 12-Station Turret, Pos. Turret, Fanuc 10TE-F CNC Control, S/N 672
• Mori Seiki AL-2ATM CNC Slant Bed Lathe, 9.84″ Turning Diameter, 20″ Turning Length, 13.77″ Swing, Equipped With Collet Nose, 12-Station Turret, Tool Eye, Tailstock, Fanuc 10TE-A CNC Control, S/N 1191

INSPECTION & QC EQUIPMENT:

• Brown & Sharpe Micro-Val Benchtop CMM, 14″ x 16″ x 12″ Measuring Range, Travels: X-18″, Y-24″, Z-15″, Equipped With Renshaw TP-ES Probe (Microscope In Photo Not Included)
• Baush & Lomb 33-12 Optical Comparator
• MicroVu 400 Optical Comparator
• Granite Surface Plates
• Large Quantity of Calipers, Micrometers, Gage Sets, Height Gages, Hardness Testers, Etc.

TOOLROOM EQUIPMENT/ SHOP SUPPORT:

• 13″ x 33″ LeBlond Regal GW149 Lathe 13″ Swing Over Bed, 8″ Swing Over Cross Slide, 33″ Distance Between Centers, 45- 1800 RPM, Equipped With 8″ 3-Jaw Chuck, Tailstock and Dual-Sided Tool Post Holder, 230/460V/AC, 50-60 Cycle
• Feeler Model FSM-59 Precision Toolroom Lathe, 9″ Swing, 36″ Bed Length, 3.75″ Cross Slide, 4″ Turret Slide 5/8″ Turret Hole, 2 HP Motor, 230-3500 RPM Variable Speed Spindle, 110V, 220 Cycle
• Lagun FTV-2S Vertical Milling Machine, 50″ x 10″ Table, Table, 33″ Longitudinal Travel, 16″ Cross Travel, 5″ Quill Travel (Hand or Power) 22-3/16″ Knee Travel, 55-4250 RPM, 3 HP Spindle Drive, Equipped With Powe Feed, Tapamatic 30X Reversible Tapping Attachment M1.5-M7  #0-1/4” Capacity, 2000 Max. RPM, Including (1) 6″ Machine Vise, and Mitutoyo Digital Readouts
• Harig Super 612 Horizontal Surface Grinder
• Spartan PA-10 Horizontal Band Saw
• Ingersoll-Rand T30 Air Compressor, 7.5 HP Motor
• Gardner-Denver VR5-8 Air Compressor, Econo-Line Blast Cabinet, Miller Dialarc HF Welder, ½-Ton P & A Jib Crane, Pallet Jacks, Graymills Clean-O-Matic Parts Washer, Pedestal Grinders, Buffing Machines, Belt Sanders, Drill Presses, Arbor Presses, Chop Saws and More!

TOOLING & MISCELLANEOUS:

• Tool Holders, Collets, Vises, Etc., Tool Carts & Cabinets, Carbide & Perishable Tooling, Misc. Hand Tools, Cantilever Racks, Heavy Duty Shelving
• Large Quantity of Raw Steel
• Office Furniture, Cabinets, and More!