** MULTI-LOCATION, ASSETS AVAILABILE IMMEDIATELY **

FEATURED ASSETS:

GEAR GRINDERS:

• Hofler Rapid 2000 Gear Grinder, 59.1″ Grinding Stoke (with External Toothing):, 19.7″ Min. Root Circle Diameter, 94.48″ Max. Tip Circle Diameter, 70.2 HP Spindle Drive Motor, Unlimited Number of Teeth, 44,092 LB Maximum Table Load, 45-Degree L/R Helix Angle, Max. 2 Tip Circle Diameter, 3.2″ Max. Grinding Wheel Width, 160kVA Operating Capacity (LOCATION: PERTH, AUSTRALIA)  VIEW VIDEO

GEAR SHAPERS: 

• Maag SH-450 Gear Shaper, 68.9″ Table Diameter, X-89.4″, Z-27.6″, C-360 Degrees, 178.74″ Maximum Tip Circle Diameter, 23.6″ Table Bore Diameter, 97.5 HP Main Motor, With Siemens Drives and PLC, Total Retrofit in 2003 (LOCATION: PERTH, AUSTRALIA)
• Maag SH-250 Gear Shaper, 2.76″-27.6″ Range of Ram Stroke, 36.2″ Max Generating Path of Work Table, 43.3″ Table Work Surface, 16.35″ Table Bore Diameter, 7.9″-98.4″ Tip Circle Diameter Range, Equipped with Siemens Drives and PLC, Total Retrofit 2008 (LOCATION: PERTH, AUSTRALIA)
• Maag SH250/300 CNC Gear Shaper, 120″ Max. Gear Diameter, 26″ Max. Face Width, Equipped With Onboard Gear Inspection, Crowning, Internal Head, Tooling, Cutters, Siemens 840D CNC Control, Retrofit 2013 (LOCATION: NEWCASTLE, AUSTRALIA)
• Fellows 20-4 Gear Shaper, 19.69″ Table Diameter, 20” Max Pitch Diameter (Internal and External), 4.02″ Max Face Width, 31.5″ Swing, Manual Control (LOCATION: PERTH, AUSTRALIA)

GEAR CHECKERS:

• Hoefler EMZ-2600 CNC Gear Checker, 102.36″ Swing, 39.37″ Face, 10 Ton Work Weight Capacity, Back Steady, Equipped With Full Software to Evaluate Gear Accuracy To AGMA and DIN, CNC Control, Retrofit 2010 (LOCATION: NEWCASTLE, AUSTRALIA)
• Klingelnberg PFSU-2500 Gear Checker, 1.34″-98.42″ Gear Inspection Range, 45 Degree Helix, 19.69″ Face Width, Computer for Gear Software Evaluation, Rebuilt 1999 (LOCATION: PERTH, AUSTRALIA)
• Klingelnberg PFSU-1200 Gear Checker, 1″-47.24″ Gear Inspection Range, 45 Degree Helix, 9.84″ Face Width, Computer for Gear Software Evaluation, Complete Overhaul 1999 (LOCATION: PERTH, AUSTRALIA)
• Gleason Gear Mesh Tester, 13.78″ Max Diameter, S/N 18946 (LOCATION: PERTH, AUSTRALIA)

CNC VERTICAL BORING MILLS:

• Homma HM-HBV1 CNC Vertical Boring Mill, 63″ Table Diameter, 78.7″ Maximum Turning Diameter, 47.2″ Rail Head Horizontal Traverse, 43.3″ Rail Head Vertical Traverse, 39 HP Table Motor, Fanuc 6T CNC Control (LOCATION: PERTH, AUSTRALIA)
• Berthiez LVM-200 CNC Vertical Boring Mill with Live Milling, Table Size: 78.74” (102.36” With Extension), Travels: X-95.27”, Z-49.21”, C-360 Degrees, Max. Workpiece Height: 78.74”, Max. Workpiece Weight: 11,000 Lbs., 65 HP Motor, Feedrate: X-39.37 IPM, Z-49.21 IPM, Equipped With Fanuc CNC Control, Automatic Tool Changer, Tooling (LOCATION: MELBOURNE, AUSTRALIA)
• Dorries SDE600 CNC Vertical Boring Mill, Siemens 840C CNC Control, 248.03″ Diameter Table, 566.92″ Max. Work Diameter, 250 Ton Table Weight Capacity, Live Milling, Siemens 840C CNC Control, Retrofit 1996 (LOCATION: NEWCASTLE, AUSTRALIA)

CNC HORIZONTAL BORING MILLS:

• Union NC-130 CNC Horizontal Boring Mill, Travels: X-110″, Y-101″, Z-88.6″, W-37.8″, 74.1 HP Spindle Motor, 5.11″ Spindle Diameter, 63″ x 55.1″ Workholding Diameter, Retrofit 2005 With Heidenhain 3-Axis CNC, Siemens Drives (LOCATION: PERTH, AUSTRALIA)
• Scharmann Repromat 125 Horizontal Boring Mill, X-59.05″, Y-43.31″, 360 Degree Table Rotation, Table Dimensions: 55.12″ x 39.37″, 6-Ton Maximum Table Load Capacity, 0.78″-66.93″ Feed Rate Range, Heidenhain Scale and Readout, Retrofit 2007 (LOCATION: PERTH, AUSTRALIA)
• Union BFP130/6 Floor-Type Boring Mill, X-315″, Y-78.7″, Z-15″, 24.05 HP Spindle Motor, S/N 11408, Equiped with Siemens Drives, Retrofit 2009 (LOCATION: PERTH, AUSTRALIA)
• Innocenti FAF147.5 CNC Horizontal Boring Mill, Travels: X-326.77″, Y-137.79″, With Siemens 3-Axis CNC Control, Siemens Drives, Retrofit 2002 (LOCATION: NEWCASTLE, AUSTRALIA)

CNC HORIZONTAL MACHINING CENTERS:

• Mazak FMS Horizontal Machining Center, Consisting of (2) Mazak CNC Horizontal Machining Centers, Travels: X-27.6″, Y-27.6″, Z-35.4″, ATC, (1) Palletech System with 36 pallets, Equipped with Mazatrol CNC Control (LOCATION: MELBOURNE, AUSTRALIA)
• Dorries Scharmann Solon 4 Horizontal Machining Center, X-63″, Y-41.3″, Z-40.2″, W-23.6″, 52 HP Motor, 39.4″ x 39.4″ Pallets, BT-50 Taper, Equipped With Siemens 800 CNC Control (LOCATION: PERTH, AUSTRALIA)

CNC LATHES:

• Mazak Integrex 40-ATC M/C CNC Turning & Milling Center, Mazatrol T-32-3 3-Axis CNC Control, 22.04″ Swing, 61.02″ Center Distance, 15.74″ X-Travel, 40 HP Motor, 3-Jaw Chuck, Milling Spindle, 60-Position ATC, Chip Conveyor (LOCATION: MELBOURNE, AUSTRALIA)
• Mazak M5 Lathe, 24.02″ Swing Over Bed, 101.97″ Center Distance, X-22.64″, 4.09″ Spindle Through Hole, Spindle Speeds 20-2200 RPM, 29.5 HP Main Drive Motor, Fanuc System 5T CNC Control (LOCATION: PERTH, AUSTRALIA)

CNC MILLS:

• Deckel FP4A CNC Universal Mill, X-19.69″, Y-15.75″, Z-15.75″, 3.54″ Spindle Quill, Spindle Speeds 50-2500 RPM, Spindle Taper ST40-M16, Deckel Contour 2 CNC Control (LOCATION: PERTH, AUSTRALIA)
• Deckel FP4A CNC Universal Mill, X-19.69″, Y-15.75″, Z-15.75″, 3.54″ Spindle Quill, Spindle Speeds 50-2500 RPM, Spindle Taper ST40-M16, Deckel Contour 12 CNC Control (LOCATION: PERTH, AUSTRALIA)

KEYSEATER:

• Fromag Combi Rapida D 100/1000 Keyseater, 25.59″ Stroke Length, .78″-23.62″ Bore Diameter Range, 3.54″ Keyway Width, 120 Pitch Index Table (LOCATION: PERTH, AUSTRALIA)

CYLINDRICAL GRINDER:

• Jones & Shipman 1300 Cylindrical Grinder, 10″ Swing, 27″ Centers, Dimensions: 98.4″ x 51.2″ x 74.8″ (LOCATION: BENDIGO, AUSTRALIA)

PRESS BRAKE:

• Herless Acra Bend XP-831 Press Brake, 785Kn, Vickers Hydraulics, Machine Dimensions: 122″ x 39.37″ x 86.61″, 415V/3Ph, S/N P14683 (LOCATION: MELBOURNE, AUSTRALIA)

VERTICAL PLATE ROLL BENDER:

• Hugh Smith 1200 Ton Plate Press (Rollers), 5.90″ Max. Plate Thickness, 120″ Max. Width Of Plate (LOCATION: BENDIGO, AUSTRALIA)

MISC. MACHINERY & EQUIPMENT:

• External Gear Hobbing Head, Suited for Module Machine, Driven by 47 HP Motor (LOCATION: PERTH, AUSTRALIA)
• Ingersoll Tool Form Grinder, 31.49″ Swing From Cutters To Template (LOCATION: NEWCASTLE, AUSTRALIA)
• Asquith OD-2 Radial Arm Drill, 8′ Arm, 1.96″ Drilling Capacity, 16-430 RPM (LOCATION: NEWCASTLE, AUSTRALIA)
• Grove Model AMZ131XT 4WD Knuckle Boom, 125′ Boom (LOCATION: BENDIGO, AUSTRALIA)
• Sundstrand Tool Setter (LOCATION: BENDIGO, AUSTRALIA)
• Supermax YCM-2GUS Vertical / Horizontal Mill, New 1992 (LOCATION: BENDIGO, AUSTRALIA)
• Mohr V. Federhaff KCS3 Brinell Hardness Tester, Vertical Drill, 6614LB Testing Force (LOCATION: BENDIGO, AUSTRALIA)
• Thomas Model 315SUP Cold Saw, 12.4″ Diameter, 3 HP, 415/3PH (LOCATION: BENDIGO, AUSTRALIA)