VERTICAL MACHINING CENTERS

• 2022 Doosan 5700 CNC Vertical Machining Center, X-41.3″, Y-22.4″, Z-20″, 51.1″ x 22″ Table, 12,000 RPM, CAT 40 Big Plus Taper, Doosan-Fanuc Series i CNC, 30 Station Side Mounted ATC, Renishaw Wireless Tool Probe and Setter, Chiller, Chip Conveyor, 2022, [MV0091-004397] VIEW LOT #64
  
• 2020 Haas VF-3YT/40 CNC Vertical Machining Center, X- 40″, Y- 26″, Z- 25″, 10,000 RPM CT40 Spindle, 20 HP, 30 Station Side mount ATC, 4th Axis Drive & Wiring, Renishaw Probing, HRT210 Rotary Indexer, (2) Kurt Vises, S/N 1173460, 2020 VIEW LOT #62
• Kafo VMC-2100 CNC Vertical Machining Center, X-84″, Y-39″, Z-31.4″, 39.3″ x 94.4″ Table, Fanuc 18-M CNC Control, CAT #50, 5,000 RPM, 40 ATC, Chip Conveyor, Spindle Rebuilt 2023, S/N: 035201 VIEW LOT #49
  
• 2017 Yasda YMC-430 V2 5-Axis CNC Vertical Machining Center, X-16.5″, Y-11.8″, Z-9.8″, 40,000 RPM, HSK-E32 Taper, 26.6″ x 13.7″ Table, RT-10 Trunnion Table, Fanuc 31i-B5 CNC, 32 Station ATC, Optical Scales, Renishaw Probe, 8,101 Hours, [2017] VIEW LOT #57
  
• Haas VF-11/50 Vertical Machining Center, X-120″, Y-40″, Z-30″, 28″ x 120″ Table, Haas CNC Ctrl, 30 Station Side Mounted ATC, Renishaw Wireless Probe, Thru Spindle Coolant, 4th Axis Enabled, Chip Auger, 2008 VIEW VIDEO / VIEW LOT #58
  
• Haas VF-5 Vertical Machining Center, X-50″, Y-26″, Z-25″, 20 HP Vector Drive, Haas VOP-C Package, Chip Auger VIEW LOT #59
  
• Microcut Maxicut VMC1600F CNC Vertical Machining Center, X-63″, Y-31″, 28″ Fagor 8055 CNC, CAT #50, 24 Station ATC, Tooling, S/N: 122333056, 2012 VIEW LOT #65
  
• Agma VMC-2210 CNC Vertical Machining Center, X-86.6″, Y-39.3″, Z-31.5″, 93.25″ x 39.3″ Table, BT #50, 32 Station Automatic Tool Changer, 1000 PSI Thru Spindle Coolant, Fanuc 18iMB,CNC Control, Renishaw TS27R Tool Setter, Tooling Consisting of Approximately 50 Tool Holders VIEW LOT #60
  
• Haas TM-1 Vertical Mill with Haas HRT-160 4th Axis, Haas Probing Tool & Part Probes Included, 10 Pos. ATC, Single or Three Phase Power, 47.74” x 10.5” Table, 30” X-Axis, 12” Y-Axis, 16” Z-Axis, Cat 40 Taper, 4,000 RPM, 7.5 HP, Haas CNC Control [2004] VIEW LOT #63

CNC LATHES & TURNING CENTERS

• 2022 Doosan GT 2600N CNC Lathe, 24.8” Swing Over Bed,18.1″ Swing over Saddle, 24″ Turning Length, Live Milling, Doosan-Fanuc Series i CNC, 12 Station Turret, Royal Collet Chuck, Tool Presetter, Tailstock, FMB Turbo 5-65 Bar Feeder, Chip Conveyor, Mist Collector, 2022 VIEW LOT #52
  
• DMG Mori CTX Gamma 2000 TC CNC Mill Turn, 27.6″ Work Piece Dia., 78.74″ Maximum Workpiece Length, 4.1″ Bar Capacity, Siemens 840D Control, 15″ Chuck on Main Spindle, 18″ Chuck on Counter Spindle, Lower Turret, 36 Station ATC, 1000 PSI, 70 HP, Misc. Tooling, S/N: 00500003581
  
• Mori Seiki SL-35 Slant Bed Turning Center, 23.6″ Swing, 30.7″ Turning Length, 15″ 3-Jaw Chuck, 12 Pos. Turret, Hydraulic Tailstock, Tool Presetter, Chip Conveyor, NOTE: Live Milling Not Operational, S/N: 188 VIEW LOT #50
  
• Mighty Viper VT-33BL CNC Lathe, 28.6″ Swing over Bed, 24.1″ Swing Over Cross Slide, 24.7″ Maximum Turning Diameter, 59.9″ Maximum Turning Length, 30 HP, 4,500 RPM, 12 Station Turret, Tool Presetter, Tailstock, 15″ 3-Jaw Chuck, 4.5″ Bar Capacity, Fanuc OiTC CNC Control, Chip Conveyor, Misc. OD & ID Tool Holders VIEW LOT #53
  
• Geminis GHT5 G2-1000×4000 Flat Bed CNC Hollow Spindle Lathe, 12.5″ Spindle Bore, 39″ Swing Over Bed, 26″ Swing Over Carriage, 157″ Between Centers, Front & Rear Chucks, 4-Position Auto-Indexing Turret, Tailstock, Steady Rest, Chip Conveyor, Fagor 8055T CNC Control, 50 HP, S/N:24010 VIEW LOT #51
• Okuma LB-35II CNC Lathe, w/ 12″ Chuck, 12- Position Turret, Tailstock, Henning Chip Conveyor, Okuma OSP-U100L CNC Control, S/N 0677 (2003) VIEW LOT #54

ANGLE BENDING ROLL

• 2023 Roundo R4S 4″ x 4″ x 1/2″ Hydraulic Angle Roll, Siemens Simatic Control, Hydraulic Powered Guide Rolls and Power Adjustment of Lower Rolls, Standard Set of Bending Rolls, 2023 [20074] VIEW LOT #37

IRONWORKER

• Geka Hydracrop 110/SD Hydraulic Ironworker, SemiPaxy Control System, 120 Ton, 24” Throat, 6” x 6” x ½” Angle Shear, Tooling VIEW LOT #31

WATER SOFTNER

• Culligan Duplex Alternating Water Softener System, 78″ x 72″ Resin Tank, 100 PSI, 240 Bags of ResinTech’s Cation IX Resin, Brand New, Still in Crates VIEW LOT #39

AIR COMPRESSORS

• 2016 Ingersoll R5I-A200 Rotary Screw Air Compressor with Air Dryer, 100 HP 200 PSI, Motor rebuilt 2024, S/N: VK4069U16282 [2016] VIEW LOT #23

PLATE ROLL

• 2023 DAVI MCA 0615 5/16″ x 24″ 4-Roll Hydraulic Plate Roll, 6″ Top Roll Diameter, 5.5″ Bottom Roll, Davi CNC Control, New 2023, S/N: 22340247 VIEW LOT #38

TUBE BENDER

• Soco SB-63AUTO Hydraulic Tube Bender, 2.5″ Capacity, Hydraulic Pressure Die Assist, Wiper, Clamping, and Pressure Die Seats, Touch Screen System, Electric Servo Controlled Feeding & Rotation Axis, Tooling consists of 1″, 1.25″, & 1.5″ Pipe, 2012 VIEW LOT #42

VERTICAL BORING MILL

• Rafamet KCFB-320 Vertical Boring Mill, 126″ 4-Jaw Table, 137″ Swing, 98″ U/R, 39″ Ram Stroke, 40 RPM, 75 HP, 2-Axis DRO, (2) Swivelling Rams, Side Head, S/N: 126 240, NOTE: Left Hand Ram Not Operational
• Pietro Carnaghi AC 25 98” CNC Vertical Boring Mill with Milling, 98” Dia., 4-Jaw Chuck, 118.11″ Max. Turning Dia, 88.58″ Max. Height Under Rail , 78.74″ Max. Turning Height, 49.21″ Ram Stroke, 9.44″ x 9.44″ Ram Cross-Section , 2–123 RPM (2 Ranges), 100 kW Table Motor , C-Axis .001° (Table Indexing) , ISO #50 Milling Spindle Taper, 0–1000 RPM Milling Spindle, 24 HP Milling Spindle Motor, Right Angle Head, 16-Station ATC, Heidenhain DRO, Siemens System 8 CNC Controls, S/N 832461 VIEW LOT #67
  
• New Century “CenturyTurn” 96” CNC Vertical Boring Mill, 96″ Table Diameter, 104″ Maximum Swing, 81″ Under Cross Rail, .9-50 RPM, Chip and Splash Guards, 75 HP Table Motor, 15-Station ATC, Fanuc 18i CNC Control, Remanufactured In 2000, S/N 3200014720 VIEW LOT #68

HORIZONTAL BORING MILLS

• Skoda WD 160/200 Floor Type Boring Mill, Skoda WD 160/200 Floor Type Horizontal Boring Mill, 6.29″ Spindle, X-126″, Y-94”, Pendant Control, Right Angle Head, 41 KW DC Motor, 800 RPM, S/N: 7112798 VIEW VIDEO / VIEW LOT #55
  
• Hyundai Kia KBN-135 CNC Table Type Boring Mill, 5.3″ CNC Table Type, 5.31″ Spindle, X-118″, Y-78″, 78″ x 70″ B-Axis Rotary Table, 0.001 Deg., CAT #50, Fanuc 16i CNC Control, 40 Position ATC, Coolant Thru Spindle, Full Enclosure, S/N: KBN1350135 VIEW VIDEO / VIEW LOT #56
  
• Toshiba Model BF-130A Traveling Column 5.12” CNC Horizontal Boring Mill, Travels: X-354″, Y-118″, Z-1 23.62″ (Spindle), Z-2 15.74″(Quill), 5.12” Spindle. Diameter, # 50 Taper, 5–800 RPM, 40 HP, Toshiba BD 20/25 78.74″ x 98.42″ Infeeding B-Axis Rotary Table, Fanuc 15M CNC Control, S/N 123.834 VIEW LOT #69

HORIZONTAL SURFACE GRINDER

• 2024 Okamoto 16″ x 32″ Horizontal Surface Grinder, 31.7″ x 15.7″ Table, Okamoto CNC Ctrl, Coolant Tank with Paper Filtration, Mag Separator Dual Voltage, Hydraulic Overhead Dressing Unit, SB-5500 Automatic Balance System, Mist Collector, Demo Hours Only, 2024, S/N 80096 VIEW LOT #66
• Mattison Horizontal Surface Grinder, 120” x 24” Table, Incremental Down Feed VIEW VIDEO / VIEW LOT #67

CNC PRESS BRAKES

• Bystronic PR320 x 4100 Hydraulic Press Brake, Cybelec ModEva 12S 8-Axis CNC Control, 357 Ton, 161” OA, 147” BH, 22.24” Extended Stroke, 6-Axis CNC Back Gaug, Hydraulic Dynamic Crowning, Willa Upper Hydraulic Clamping, Lower Hydraulic Clamping, Light Safety System, Flush Floor Design, S/N: 7460005 [2007] NOTE: Machine is not under power. According to the technician, a proportional valve will need to be replaced. Location: North Carolina VIEW VIDEO / VIEW LOT #43
  
• LVD Strippit PPEB 350/15, 350 Ton Press Brake, 177″ OA, 150″ BH, 7-Axis Cadman CNC Control, Wila Hydraulic Clamping, Auto Crowning, 2007 VIEW VIDEO / VIEW LOT #44
  
• Darley EHP 50 25/20 Hydraulic Press Brake, 55 Ton x 10′ 8-Axis CNC Press Brake, 100″ OA, 80″ BH, 4.72″ Stroke, Delem, DA-65 CNC Control, 2-Axis Ram, 6-Axis B.G., 10 HP, Tooling [1999] VIEW VIDEO / VIEW LOT #26
  
• Cincinnati 135 Ton CB x 10 CNC Hydraulic Press Brake, 135 Ton, 12′ OA, 10’6″ BH, Hurco AB-7 CNC Control, Single Axis B.G., Palm Button Controls VIEW LOT #46

PLASMA CUTTER

• Torchmate Plasma Cutter, 10′ x 15′ Cutting Area, Hypertherm Powermax 85 Amp, Water Table with Adjustable Height to Submerge Material, Automated Arc Voltage Height Control for Plasma VIEW LOT #41

SHEAR

• Cincinnati 4SE20 FSU III 1/2″ X 20′ Hydraulic Squaring Shear, 60″ Power Back Gauge, 40 HP, 1991 VIEW LOT #47

3D PRINTER

• 2017 HP Jet Fusion 3D 4210 3D Printer, Effective Building Volume, 15″ x 11.2″ x 15″, Layer Thickness of 0.003″, Job Processing Resolution 600DPI, Pring Resolution 1200 DPI, 2017 VIEW LOT #70

SINKER TYPE EDM

• 2017 Belmont Maxicut MX-246 Sinker Type EDM, X-18.5″, Y-14.9″, Z-7.2″, Back Slide-11.8″, Worktable: 47.2″ x 27.5″ x 14.9″, 330 Gallon Dielectric Reservoir, EDM Output, 300 A, New 2017 VIEW LOT #71

WELDING CELL

• 2021 CLOOS Robotic Welding Cell, Model/Type QIROX QC 2.0 – CS-30, s/n 0871210010-18269 QRC 410-E_2.0, Consisting of: CLOOS QIROX QR-WP-DH-TC-10kN 2-Station Welding Fixture, CLOOS QIROX QR-CTU-50-09 2.0 Annex Positioners, CLOOS Qineo PULSE 451 PRO Arc Welding Power Source, P/N – S/N QIPuPRO – 992, Pendant Control, CLOOS QRC410-E/Z 2.0 Robotic Arm, P/N – S/N 0884292070-18269, CLOOS CMR 8-C-S Torch Cleaning Unit, , CLOOS QIROX Controller, s/n 0871210010-18269, Type Series QC2.03, Type QRC 410E/2.0, 43 KVA, Light Curtains, 2,244hrs, Original Drawings, Manuals, Spare Parts, etc., Only 2,200 Hours, New 2021 VIEW LOT #36

CNC LASERS

• 2018 Mitsubishi ML3015eX Plus CNC Laser, 4500 Watt, 60″ x 120″, Pallet Changer, M700 CNC Control, Chiller, Dust Collector, 2018 VIEW LOT #40
  
• Epilog Fusion M2 Laser Engraver, 60 Watt CO2, 30 Watt Fiber, 32″ x 20″ Engraving Area [2015] VIEW LOT #29

CNC TURRET PUNCH PRESS

• Finn-Power C5 33 Ton Turret Punch Press, 99.6″ x 50″ Sheet Size, Siemens 840D CNC Ctrl, 20 Station Thick Turret, (8) Auto-Index Stations, Multi-Tool, Bursh Table Design VIEW LOT #35
• Trumpf Trumatic 1000 R 18 Ton CNC Punch & Contouring Machine, 50″ x 80″ Travel, Bosch CNC, 15 Station Linear Tool Magazine, Multi Tool Option, Ball Table Design, Cartridges, S/N: A0045A0038 VIEW VIDEO / VIEW LOT #34

ADDITIONAL EQUIPMENT

• 3000 Lb. Capacity LPG Forklift, Side Shifter, Solid Tires, S/N: A15B00126 VIEW LOT #24
  
• 2019 Aslan Automated Up-Cut Mitre Saw, 17″ Blade Diameter, 3,000 RPM, (2) Pneumatic Vertical/Horizontal Clamps, Conveyor [2019] VIEW LOT #28
  
• Techniks ShrinkPRO Shrinkfit Machine, Tool Change Time 2-6 Seconds, Touch Screen VIEW LOT #30
  
• (2) 2017 Fanuc LR Mate 200iD 7L Welding Robots, 6-Axis, 15.4 Lb Load Capacity, 35.86″ Reach, 200iD Power Supply, System R-30iB Mate Control and Pendant, 2017 VIEW LOT #32 / VIEW LOT #33
  
• 2016 Clausing Kalamazoo KC12SA Horizontal Band Saw, 12″ x 15″ Rectangular, 12″ Round Capacity, 1.3″ 150.4″ Blade Capacity, New 2016 VIEW LOT #25
  
• K-TIG WC 1000 Keyhole Tig Welding Unit VIEW LOT #48