CNC MILLING/DRILLING CENTERS

• Giddings & Lewis VTC 3500FX 120″ CNC Vertical Drilling Center, 118″ Table Diameter with Rohm 6 Jaw Power Chuck, 137″ Swing, (2) 31 Station Tool Changers, Live Spindle for Milling and Drilling in Both Rams, C-Axis Table for 0.001 Degree Indexing, 1,000 PSI Thru Spindle Coolant, Full Chip and Splash Enclosure, Chip Blaster {NOTE: Machine was just removed from Operation}
  

CNC HORIZONTAL MACHINING CENTER

• Okuma MB-5000H CNC 4-Axis Horizontal Machining Center, X-29.92″, Y-29.92″, Z-29.92″, 19.69″ x 19.69″ B-Axis Pallets, OSP-P300MA CNC Control, 146 Station ATC, 15,000 RPM, CAT 40 BIG PLUS Taper, Renishaw Tool Probing, Renishaw Auto Work Gauging, Coolant Thru Spindle, Chip Conveyor, [2018]

CNC VERTICAL MACHINING CENTER

• Haas VF2 Vertical Machining Center, X-30″, Y-16″, Z-20″, 40 Taper, 21 Station ATC, Probe, Chip Auger, S/N: 1140032 [2017]
  
• Haas Super Mini Mill, 36″ x 12″ Table, X-16″, Y-12″, Z-10″, 6,000 RPM, 40 Taper, 10 Station Tool Changer
  

CNC TURRET PUNCH PRESS

• Trumpf Trumatic 2020R CNC Punch & Contour Machine With SheetMaster Load-Unload, 22 Ton, 50″ x 100″ Travel, Bosch 3 CNC Control, 19 Station Tool Changer, 2005
  

CNC PUNCH/PLASMA

• Whitney 3400 RTC Punch Plasma Machine, 40 Ton Capacity, X-140″, Y-60″, Fanuc 16P CNC, Hypertherm HT 2000LHF, 9 Station Tool Changer, Dust Collector, Loading with Tooling

CNC PRESS BRAKES

• Pacific 400-16 Hydraulic Press Brake, 400 Ton, 16′ OA, 14’4″ BH, 14′ x 3/8″ Bending Capacity, 12″ Stroke, 44″ Pit Needed, 440V/3/60, S/N- 3539, New 1969, Includes Back gauge and Die Rails
  
• Bystronic Xcite 80E CNC Electric Servo Press Brake, 88 Ton, 80.70″ OA, 5-Axis B.G., Byvision CNC Control, Hydraulic Upper & Lower Clamping, Wila New Standard Clamping, S/N: 13420024, [2013]
  

GRINDERS

• 2024 Okamoto 16″ x 32″ Horizontal Surface Grinder, 31.7″ x 15.7″ Table, Okamoto CNC Ctrl, Coolant Tank with Paper Filtration, Mag Separator Dual Voltage, Hydraulic Overhead Dressing Unit, SB-5500 Automatic Balance System, Mist Collector, Demo Hours Only, S/N 80096 [2024]
  
• Blanchard 18-42 Rotary Surface Grinder, 42″ Chuck, 50″ Swing, 20″ Grinding Wheel, Segment Spacers and Spares Included, Updated Magnet Control, S/N: 4290
  
• Blanchard Rotary Surface Grinder, 84″ Diameter Chuck, 5/8″ Life Left, 100 HP Headstock Motor, 40″ Height Under Spindle Approx., Neutrofier II Chuck Control, Coolan Tank (Under Ground), S/N-12776, New 1968
  
• Blanchard 18-36 Rotary Surface Grinder, w/ 36″ Diameter Electromagnetic Chuck, 38″ Max Part Swing, 18″ Max Height Under Wheel, 18″ Wheel Diameter, 6-18 RPM Table Speed, Neurol IRC12 Magnetic Control, S/N: 5696
  
• Hill Acme Company Horizontal Surface Grinder, 30″ x 92″ Work Surface (2- 30″ x 45.5″ Magnetic Chucks), No Power Incremental Down Feed, S/N- 258
  
• K.O. Lee B300 Surface Grinder, w/ 3.62″ x 23″ Table, S/N: 8779-265

CNC LATHES

• Mighty Viper VT-50AX/4000 35″ x 157″ Slant Bed CNC Lathe, 39″ Swing Over Bed, 157″ Centers, 9.25″ Spindle Bore, Fanuc 21i-TB CNC, 12 Pos. Turret, 25″ 4-Jaw Chuck, Steady Rest

SWISS TURNING CENTER

• (2) Tornos DECO Sigma 20 CNC Swiss Turning Centers, Fanuc 31i-Model A CNC Control, 25.4mm Maximum Bar Dia., (For 20mm Min. Remnant), HEADSTOCK S1: 20mm Round Bar Dia. without Preparation, 25.4” Max. Round Bar with Preparation, 17 Max. Drilling Dia., M12 Thread Dia., 200mm Part Length with Guide Bushing, 0.1 Deg. Stops Increment; HEADSTOCK S4: 20mm Round Bar Dia., 14mm Drilling Dia., M12 Thread Dia., 200mm Part Intro Length Thru Counter Spindle; ROTATING TOOLS: 80mm Max. Radial Drilling, M6-M8 Max. Radial Threading, Each Machine Equipped with LNS High Pressure Coolant, Chip Conveyor, Tornos SBF-532 Bar Feed, S/N 7486, S/N 50468 [2007]. NOTE: Both machines are under power. 1 machine Parts needed – Sub/Bearings, Main Spindle maybe rebuild, chuck device.
  

GEAR MACHINES

• MAAG SH250 Large Capacity Gear Shaper, 98″ Capacity, 44″ Built in Rotary Table, Allen Bradley PLC Retrofit in 1999, 95″ & 112″ Additional Tables (Sub-Plates), Set of Change Gears, Chip Conveyor
  

SHEARS

• GMC Hydraulic Shear, HS11214M, 14 Ga. x 12′ Capacity, 10-12 SPM, 24″ B.G., 10 HP, S/N: A25110314
• Ursviken US 230 Hydraulic Guillotine Squaring Shear, 1/4″ x 10′, 36″ Power B.G
  

TUBE BENDER

• Pines #2 Hydraulic Rotary Tube & Pipe Draw Bender, 3″ Capacity, 12″ Bend Radius, Dial-A-Bend Control, Hydraulic Mandrel Extractor, Right Hand Machine, S/N: 11235-09014, New 2009
  

CNC LASERS

• 2023 Laser Cutting Machine FLS-6023, 3KW Fiber Tube Laser, Raycus Laser Source, [New 2023]
  
• 2023 Laser Cutting Machine FLS-3015, 12KW Fiber Laser, Raycus Laser Source, X-120″, Y-60″, [2023]
  

PANEL BENDER

• Salvagnini P4-2516 CNC Panel Bender, 98″ Bending Length, Feeding Conveyor & Table, Rotate in Place Table, Completely Rebuilt by Salvagnini 2022 (Lower Bending Blade, Plate for Counterblade, Flip Table Left and Right Side, Chiller, Control, Software), Loaded with tooling
  

VERTICAL TURRET LATHES & VERTICAL BORING MILLS

• 36″ Bullard Spiral Drive Vertical Turret Lathe, w/ 38″ Max Part Swing, 42″ Max Height Under Rail, 26″ Turret Stroke, 4.1-70 RPM, 5-Position Turret, 4-Jaw Manual Chuck, S/N: 21880
  
• 42″ Bullard Spiral Drive Vertical Turret Lathe, w/ 44″ Max Part Swing, 33″ Max Height Under Rail, 27″ Turret Stroke, 4.1-70 RPM, 5-Position Turret, Side Head, Acu-Rite Quickcount 2-Axis Digital Readout, 4-Jaw Manual Chuck, S/N: 29625
  
• 42″ Bullard Spiral Drive Vertical Turret Lathe, w/ 44″ Max Part Swing, 33″ Max Height Under Rail, 27″ Turret Stroke, 4.1-70 RPM, 50-Position Turret, Side Head, 4-Jaw Manual Chuck, S/N: 20003
  
• 42″ Bullard Spiral Drive Vertical Turret Lathe, w/ 44″ Max Part Swing, 33″ Max Height Under Rail, 27″ Turret Stroke, 4.1-70 RPM, 50-Position Turret, Side Head, 3-Jaw Manual Chuck, S/N: 20416
  
• 120″ Craven 657 Vertical Boring Mill, w/ 129″ Max Swing, 72″ Under Tool, 84″ Max Height Under Rail, 46″ Ram Stroke (left hand side), 36″ Ram Stroke (right hand side), Newall A50 Digital Readout (left hand side), Acu-Rite Digital Readout (right hand side), 60HP Motor, S/N: 17512
  

AIR COMPRESSORS

• Ingersoll Rand Sierra H50A Air Compressor, 50 HP, Oil Free, 179 SFM
  
• Atlas Copco ZT55 Rotary Air Compressor, 75 HP, Air Cooled, 131 PSIG, Oil Free, 2011, S/N: APF 164797
  

ADDITIONAL EQUIPMENT

• (2) 2018 Raymond 750-R45TT Forklifts, 4,500 Lb. Capacity, Stand Up Electric Forklifts, [2018]
  
• Techniks ShrinkPRO Shrinkfit Machine, Tool Change Time 2-6 Seconds, Touch Screen 
  
• Bridgeport Milling Machine, Power Feed, 80-2720 RPM, Acu-Rite Digital Readout, S/N: J34225
  
• Bridgeport Series I 2HP Vertical Milling Machine, w/ 9″ x 42″ Power Feed Table, Spindle Speeds to 4200 RPM, Acu-Rite Quickcount II 2-Axis Digital Readout, S/N: 12BR212554
  
• Grizzly Milling Machine, Power Feed, Sinc Digital Readouts, 50-3,750 RPM
  
• Lincoln Power Mig 300 Welder
  
• Miller Millermatic 251 Welder
  
• American Hole Wizard Radial Arm Drill, w/ 15″ Column Diameter, 48″ Arm, 12″ Quill Travel, Magnetic Swivel, 39″ x 42″ T-Slotted Work Table, S/N: 6558342