Craven 127" x 360" Heavy Duty 4-Axis CNC Lathe, Retrofit 2010
Model: Heavy Duty
Age: 2010 ®
Ref#: 28376
Category: Lathes, Flat Bed, Manual & CNC
Specifications:
FEATURES:
Fanuc 0i-TC CNC Control (Retrofitted 2010):
75" 4-Jaw Chuck With 4-Top Jaws:
4-Way Bed Construction:
2-Carriages:
20.5" Head & Tailstock Risers:
New Drive Nut & Drive Motor On Rear Center (2015):
New Side Rail On Main Carriage (2015):
New Roller Bearings In Headstock In 2005:
New Lubrication System, New Pump, Relay Wire, Wirings & Fittings (2005):
CAPACITY:
Maximum Swing Over Bedways: 127"
Maximum Swing Over Carriage: 88"
Distance Between Centers: 360"
Overall Length Of Bed: 540"
Width Of Bedways: 90"
Maximum Spindle Speed: 62 RPM
Maximum Work Piece Weight: 110,156 Lbs
Maximum Work Piece Weight, 1-Steady: 176,250 Lbs
Main Motor Power: 75 HP
Approximate Floor Space Required: 697" L x 132" W
Approximate Overall Weight Of Machine.. 180,000 Lbs: 180,000 Lbs
Equipped With:
Fanuc 0i-TC CNC Control (Retrofitted 2010)
Operators Remote Pendant
75" 4-Jaw Chuck With 4-Top Jaws
2-Carriages, Front & Rear
4-Way Bed Construction
Front Carriage With Fanuc Red Cap Servo Motors On Cross Slide & Tool Post
Rear Carriage With Master Setco Servo Slide & Tool Post
Heidenhain Scales
Powered Tailstock, Sits On Center Bedways
New Drive Nut & Drive Motor On Rear Center (2015)
New Side Rail On Main Carriage (2015)
New Roller Bearings In Headstock In 2005
New Lubrication System, New Pump, Relay Wire, Wirings & Fittings (2005)
(2) 10" - 24" Roller Steady Rests (New 1999)
(2) Work Rests
20.5" Head & Tailstock Risers
(1) Indexable Tooling Riser
(1) Solid Tooling Riser
Threading
75 HP Main Drive Motor
NOTE:
Inspect In Plant Under Power
Print This Page
Back to Full Specs