**  PRE-AUCTION OFFERS INVITED ON MAJOR ASSETS **

Contact: Paul Lashin, 631-249-5566, [email protected]

FEATURED ASSETS:

**All Machines Located at 810 Hudson Street, Antigo, WI (Unless Otherwise Noted)

GEAR MACHINERY:

• GLEASON 3000GMM Sigma CNC Gear Inspection Machine, 118” Gear Diameter, 39.4” Diameter Table, 78.74” Z-Axis, 4-Position ATC, with Gamma 3.1.125 Software, SN 6790
• HOFLER Helix 700 Form Style CNC Gear Grinder, 27” Max. Gear Dia., 13.8” Axial Stroke Length, 45-Deg. Helix Angle, 4000 RPM, Hofler CNC Control, Paper Coolant/Filtration (3001 West Canal Street, Milwaukee)
• LIEBHERR LC-502 CNC Gear Hobber, 19.7” Workpiece, 15.7” Table Dia., 7.87” Tangiential, 15.7” Axial, 6.7” Cutter Dia., 9” Cutter Length, +/-50 Deg. Swivel, Tailstock, SN 02505
• PFAUTER 1800MM Vertical Gear Hobber, 18″ Face, 54″ Dia. T-Slotted Table, Tailstock, SN 20479
• (2) BARBER COLEMAN 16-16 Horizontal Gear Hobber, SN 3595 & 3319
• BARBER COLEMAN 14-15 Horizontal Gear Hobber, with Change Gears, SN 783 (3001 West Canal Street, Milwaukee)
• GLEASON 537 Gear Quenching Machine, (3001 West Canal Street, Milwaukee)
• OVERTON FD-800 Gear Hobber, 11-31″ Gear O.D., 20″ Gear Face, DP 3, Tailstock, SN 597
• (2) FELLOWS 6A and 4GS Gear Shapers

CNC VERTICAL BORING MILLS:

• 590” FRORIEP 4-Axis Double Column CNC Vertical Boring Mill, 2-Rams, 78.74” Vertical Travel, 393.37” Table Dia., 590.55” Turning Dia., 196.85” Turning Height, 200-Ton Table Weight Cap., (4) Speed Ranges 0.13-13 RPM, Dual Pendant Operator Stations, Chip Conveyors, Table Extensions, 250 HP Table Motor, Siemens 840D CNC Control, [Rebuilt & CNC Retrofit 1999], (3001 West Canal Street, Milwaukee)
• 120” NEW CENTURY VTL-120 CNC Vertical Boring Mill, Fanuc 18iT CNC Control, 100” Table with 4-Jaw Face Plate, 12-ATC, SN 2719
• 108” CINCINNATI HYPRO VTC-96 Vertical Boring Mill, 2 Swivel Rams, Side Head, 108” Table Diameter W/4-Face plate Jaws, 127” Swing, 84” Height Under Tool Holders, 54” Vertical Ram Travel, 72” Vertical Travel of Side Head, Table Speeds: .61-24 RPM, 40 HP, Pendant, (3001 West Canal Street, Milwaukee)
• MAZAK Megaturn A10-MC CNC Vertical Turning Center, Milling, SN 89747, 57” Swing, 2APC Pallet Shuttle, 39.37” Dia. Pallets, 5500 Lb. Pallet Capacity, 80 HP/30 HP Spindle Motor, 30 ATC, Cat 50 Taper, Live Milling, with Mazatrol T32-3 CNC Control, SN 89747

HORIZONTAL BORING MILL:

• KURAKI KBT-1101P Table Type Horizontal Boring Mill, 4.3” Spindle Dia., X-84”, Y-72”, W-59”, Z-31.5”, 49” x 78” Table, 12-1200 RPM, #50 Taper, Sony 3-Axis DRO, 20 HP, SN 1239 (3645 West Elm Street, Milwaukee)

CNC MACHINING CENTERS:

• GIDDINGS & LEWIS 450 MC-60 CNC Horizontal Machining Center, 6” Spindle Dia., 204 ATC, Travels: X-120”, Y-98”, Z-48” (Spindle) W-98”, (2) 60” x 72” Pallets, (2) 60” x 96” Pallets, 12-2500 RPM, 50 HP, Probe, Software for CH Facing Heads, Probe, CAT 50 Taper, Thru-Spindle Coolant, G & L 8000B CNC, S/N 450-289-93 (3001 West Canal Street, Milwaukee)
• GIDDINGS & LEWIS 15VF Traveling Column CNC Vertical Machining Center, 40 ATC, Travels: X (Column)-192”, Y (Head)-72” Head, Z-20”, #45 Taper, Floor Plates (May Be Sold Separately), G & L 8000 CNC Control, SN 986-0006-69 (3001 West Canal Street, Milwaukee)
• MAZAK VQC-20/50B CNC Vertical Machining Center, (2) 48″ x 21″ Pallets, CAT 50 Taper, 24 ATC, SMW 4th Axis Rotary Table, 10″ 3-Jaw Chuck & ACCU-SMART65 Control, with Mazatrol CAM M2 CNC, SN 63468

CNC TURNING CENTERS:

• MORI SEIKI SL-7B CNC Lathe, 36.4” Swing Over Bed, 22.8” Over Cross Slide, 60” Centers, 18” 3-Jaw Chuck, 12-Station Turret, 4″ Hole, 1800 RPM, Tailstock, X-15.7”, Z-61”, Chip Conveyor, Fanuc 6T CNC, SN 174
• MAZAK QT-35U CNC Lathe, 20” Swing Over Bed, 16” Swing Over Carriage, 12″ 3-Jaw Chuck, 12-Station Turret, 2.5″ Hole Thru Spindle, 3,000 RPM, Chip Conveyor, with Mazatrol CAM T-2 CNC, SN S0681

HEAT TREAT DEPARTMENT:

• PACIFIC SCIENTIFIC (SELAS) Electric Fired Box Draw Furnace, Model PKMD-100E, 30″W x 48″L x 24″H, 1450 Deg., #662-0619
• PACIFIC SCIENTIFIC (SELAS) Gas fired Box Draw furnace, Model PKMD-120-G, 30″W x 48″L x 30″H, 1450 deg., #662-0619, SN 662-0388
• LINDBERG Electric Box Draw furnace, Model 13-ECE-304830-14, 30″W x 48″L x 30″H, 1400 Deg., SN 24828
• TRENT 1400 Deg. Electric Oven, 42″ x 42″ x 42″ Work Area, 39″ x 27″ Tray, SN 900-414
• MERK Box Type Gas Draw Furnace, 46″ x 46″ x 66″ Door, 1200 Deg. Lightweight Fiber Interior, 600-1175 Deg.
• MERK Box Type Gas Draw Furnace, 46″ x 46″ x 66″ door, 1200 deg. Light Weight Fiber Interior
• DESPATCH Model V29 Cabinet Oven, 37″W x 25″L x 37″H Work Area, 500 Deg., Digital Control, SN 41288
• DESPATCH Model WB25 Oven, 34″W x 48″L x 30″H, 36” Door, SN O81547
• DESPATCH Model V265 Cabinet Oven, SN 118356
• PACIFIC SCIENTIFIC Model PKM-100-2-GRT Custom Gas Fired Quench Furnace, 2-Zones, 1900 Deg., #661-2919, 30″W x 48″L, 24″ H Work area, Nitrogen, Methanol, 30″ W Pass Through, SN 661-2919
• PACIFIC SCIENTIFIC Karbo-Matic PKM-120-Grt Gas Fired Oil Quench Furnace, 1900 Deg. F, 30″W x 48″L x 30″H Work Size, #662-0387, Straight Through Design, Nitrogen, Methanol, 30″ W Pass Through, SN 662-0387
• PACIFIC SCIENTIFIC PP-LTC-120-F Heat Treat Oven, SN 662-0389
• PACIFIC SCIENTIFIC (SELAS) Electric Batch Washer, Model PW-100-E, 30″W x 48″L x 24″H Work Area, 180 Deg., #662-0620
• PACIFIC SCIENTIFIC Transfer Cart, Model PPLTC-120-f, 30″W x 48″D, #662-0389
• SELAS KARBO-MATIC PKMD-100-ERTNM-S Gas-Fired Quench Furnace 30″W x 48″ L x 24″ H Work size, 2100 Deg. F., with Wash/Rinse, Nitrogen, Methanol, 30″ W Pass Through, #662-0618, SN 662-0618

BLASTING/FINISHING DEPARTMENT:

• WHEELABRATOR Rotary Table Blaster & Torit DFO 2-8 Dust Collector, SN 662-0388
• MARCI Blast Cabinet
• TRINCO Blast Cabinet
• 14’ x 15’ Paint Booth

PART WASHING:

• PROCECO 62000 Gas Fired Parts Washer, Typhoon 60-48-G-2000, SN 89-206
• (2) JRI Cabinet Parts Washer, SN 89-206
• NOBLES Parts Washer with Rotary Table
• BETTER ENGINEERING Parts #7 Impulse Washer

INSPECTION & LAB EQUIPMENT

• 2013 SHEFFIELD Endeavor III Plus 12-30-10 CMM, X-118”, Y-40”, Z-47”, SN 0613-6607UA 2013, w/2018 PC-Dimis Software
• LECO LM-700AT Hardness Tester, SN FM7693
• GEIT MIC 10 UCI Portable Hardness Tester
• MITUTOYO Surface Roughness Measuring System
• BRINELL Micro Hardness Tester UK 300H 97970

PRESSES:

• 200-Ton PHOENIX OGF-200 Upacting Hydraulic Press, 32” x 36” Top Ram, 36” x 36” Bed, SN 30133
• 150-Ton HANNIFIN S-1 50-1 2-4-2-90 Hydraulic Straightening Press, SN A42216

OVER 20 WELDERS, INCLUDING:

• MILLER Goldstate 652 Welder
• MILLER Deltaweld 452 Welder
• MILLER Millermatic 212 Welder
• LINCOLN ldealarc DC- 1000 Welder

AIR COMPRESSORS:

• GARDNER DENVER 75 HP Electra Saver II Rotary Screw Type Air Compressor
• GARDNER DENVER 40 HP Electra-Saver II Rotary Screw Type Air Compressor
• GARDNER DENVER VS110 Air Compressor, SN S294324
• GARDNER DENVER 750A4 Air Dryer
• KAESER FS440, 335 HP, 125 PSI, 2000, wired 440 volts, [2000] (4695 West Greenfield Ave, Milwaukee)I

MISCELLENEOUS MACHINERY, SHOP SUPPORT, ETC.:

• 64” 4-Jaw Chuck
• 72” LUCAS Rotary Table, SN 48PWQ211
• 24” x 48” SPRINGFIELD Engine Lathe
• KEARNEY & TRECKER 2K Universal Mill
• GORTON 1-22 Vertical Mill
• WESTBURY 80-2743 Vertical Mill
• ARTER MODEL B-24 Rotary Surface Grinder, Dresser, 24” Mag. Chuck, SN 56-3581
• ELECTRO-ARC Tapper
• MARVEL 15A4 Band Saw, Table Feed, SN D15773
• 12” KALAMAZOO Saw
• KARDEX lndustriever 8000 Vertical Tool Storage Unit
• CAT Magnum Floor Scrubber
• 800 GALLON Surge Tank
• WEBBER AT94-120 Industrial Freezer
• SCIENTEMP 120 Deg Chest Freezer
• 10-Ton CUSTOM STEEL Overhead Bridge Crane, 25’/23’ Span, 40’ Runway, Single Girder, Sidehung
• 2018 KENNEDY / UNDERWRITING LABORATORIES Above Ground Flammable Liquid Storage Tank, 10,363 Gallon Capacity, SN A61055

THE FOLLOWING ITEMS ARE LOCATED AT 2207 WEST AVE, WAUKESHA, WI:

• MAS VOM-50 Universal Radial Drill, 52” Column Travel, 360 Arm and Drilling Head Rotation, 90 Degree Head Horizontal/Vertical Swivel, 5.3 HP, 1991
• TOS Right Angle Milling Head, #50 Taper, From TOS H100A Horizontal Boring Mill
• FUTURMILL DT-8-18-30 30 HP Planer Mill Milling Head, #50 Taper, 900 RPM

THE FOLLOWING ITEMS ARE LOCATED AT 3001 WEST CANAL STREET, MILWAUKEE, WI

MILLS & DRILLS:

• LAGUN FTV-2S Vertical Mill, Vari Speed Head, 50” x 10” Table, X-Axis Power Feed, Hartford Manual Indexer, Chuck
• LAMINA-DRILL Portable Drill, Drill Head, SN P1270
• ANCHOR LAMINA Portable Drill, Magnetic Base Drill Head, SN 372410.01
• LAMINA Hydradrill Portable Drill, Drill Head, SN P-407
• CINCINNATI ROYAL Manual Drill Press
• SOLBERGA SE725 Geared Head Drill, 60-1440 RPM, Vise, Power Feed, 7″ Stroke, 1.8 HP

PART WASHER:

• PROCECO 42″ table type washer, Model HD42-48-E-2500-1-SC, 2500 Lb. Load, 42″ Table, 48″ Part Height, Electric, Conveyor, SN 96-238

AIR COMPRESSORS:

• SULLAIR LS20-100SL/A/SUL, SN 003-123964
• INGERSOLL RAND SSR-UP6-30-125, Rotary Screw Type, SN PXO472U02210

GRINDERS:

• 6” x 18” OKAMOTO 6-18DX Automatic Surface Grinder, Walker Magnetic Chuck, Incremental Downfeed
• 12” ELB Rotary Grinder, 12” Diameter Magnet, Demagnetizer (3301 West Canal Street, Milwaukee)
• SETCO Dual Head Grinder, Model SPL, Type 502-205-8, #95356, 5 HP, 12″ & 14″ wheels
• OLIVER Drill Point Grinder
• ROYAL OAK Grinder, Motorized Vari Speed Head, SN 8436
• HAMMOND CB-77B, Double End Diamond Grinder, SN 7311
• EXCELLO Double End Slag Grinder, with Tables, 14” Wheels
• CINCINNATI No. 2 Tool & Cutter Grinder, Model D, #1D2F5YF12, 1972
• 12” Dual Wheel 2 HP Pedestal Grinder

SAWS:

• DO ALL Model ML Vertical Band Saw, Welder
• EVERETT Model 10 Manual Abrasive Saw

WELDING:

• ACORN 5′ x 6′ Welding Table, Stand (3301 West Canal Street, Milwaukee)
• WORTHINGTON Nontilting Motorized Welding Positioner, 53″ x 53″ Table

MISCELLENEOUS:

• 2012 RUSCH MACHINE & DESIGN (RMD) Model M174 Tube Bender, SN 37899255 [2012]
• MITTS & MERRILL 3A Mechanical Key Seater, #E13929-11-51
• 30-Ton LUCAS Power Press, #30-35-28, 48″ Bed to Ram, 29″ Between Columns
• PACIFIC SCIENTIFIC RXGENERATOR, Size S-3-AP, 3600 CFH Capacity, 1950 Deg. Max., Air Cooled, SN C-8049-2 B (3301 West Canal Street, Milwaukee)
• PORTABLE OFFICE, Exterior/Interior, Aluminum, Dimensions 7’9″ x 7’9″ x 15’6″, Dual Sliding Doors, Set-Up for Power & Lights