Union BFP130/6 130 MM Floor Type Horizontal Boring Mill
Model: BFP-130/6
Age: 1980
Ref#: 24201
Category: Boring Mills, Horizontal, Floor Type, Manual
Specifications:
Note::
CAPACITY:
Column Longitudinal Travel: 5562.6 MM
Column Travel: Rack & Pinion Driven
Head Vertical Travel: 2489 MM
Head Vertical Travel: Driven by Ball Screw & Fanuc Servo Motor
Column Cross Travel: 399 MM
Column Cross Travel: Driven by Ball Screw & Fanuc Servo Motor
Spindle Travel: 991 MM
(27) Spindle Speeds: 4.5 to 900 RPM
Spindle Taper: #50 with Power Draw Bolt
Facing Plate Diameter: 864 MM (covers the facing head)
Facing Head Diameter: 785 MM Diameter
(18) Facing Head Speed: 4.5 to 180 RPM
Facing Head Travel: 320 MM
Spindle Feeds: .03 to 48 MM Per Rev., & .0016 to 2.00 TPR
(36) Feeds to Head & Column (L,W,H): .024 to 1999 MM/MIN
Equipped With:
Rapid Traverse
Facing Head
Universal Right Angle Milling Head with 622 MM Long Extension
Tailstock with 1981 MM Power Vertical Travel 991 MM Power Longitudinal Travel on the Base
3-Axis Acu Rite DRO: Head Vertical Travel, Column Cross Travel & Spindle Travel
Pendant Control
Sliding Metal Way Covers on the Bed
Wedge Type Leveling Pads
All Hard Ways
Spindle Drive Motor: 18.5 KW, 3/60/480V
Note:
In 1989 Upgraded Ball Screws & Fanuc Servo Drive to the Head Vertical Travel & the Column Transverse Travel.
SHIPPING SIZES:
Bed & Column Base, (L,W,H)
Bed & Column Base
Head, (L,W,H)
Head
Column, (L,W,H)
Column
Tailstock, (L,W,H)
Tailstock
Right Angle Attach. & Exten. (L,W,H)
Right Angle Attach. & Extension
Overall Machine Assembled
Note:
In 1989 Upgraded Ball screws & Fanuc Servo Drive to the Head Vertical Travel & the Column Transverse Travel. Currently we believe there are 2 Fanuc control cards that are NOT functional and thus the machine control does not boot up and that makes the machine not operational. When the machine did work it worked fine. This is NOT a cnc machine. It still uses the manual pendant for operational control.
Print This Page
Back to Full Specs