World's Leading Provider of Used Machinery
Doosan TT1800SY 7-Axis CNC Turning & Milling Center
Model:
Puma TT1800SY
Age:
2008
Ref#:
32856
Prestige Equipment is the world's leading provider of Doosan TT1800SY 7-Axis CNC Turning & Milling Center & machine tools & fabricating equipment. Take a look at our wide selection of new and used Three Axis Or More CNC Lathes for sale.
Product Specifications
Features:
✓
Fanuc 18i-TB CNC Control
✓
Full C Axis Spindle Rotation - Both Spindles
✓
Live Milling/Drilling Capability - Both Turrets
✓
Y Axis Capability on Upper Turret
✓
Twin Turret Design with Upper and Lower Turrets
✓
Dual Spindle Design
✓
LNS Servo S2 Short Load Barfeeder
✓
Hydraulic Chucks on both Spindles
✓
Tool Presetter
✓
Parts Catcher
✓
Parts Exit Conveyor
✓
Chip Conveyor
✓
PCMCIA Card Interface
✓
RS 232 Port Interface
✓
3 Color Machine Status Condition Lights
✓
Boxed Ways
✓
Coolant Tank with Pump
✓
All Available Manuals
✓
All Available Static Tooling ONLY
Product Specifications
SPECIFICATIONS:
With Dual Opposed Spindles, Upper & Lower Turrets
Swing Over Carriage
9.05"
Max. Turning Dia., Upper & Lower
9.05"
Max. Bar Capacity
2.625"
Spindle Speed
5000 RPM
Spindle Nose .
ASA-A2-6
Spindle Draw Tube I.D.
2.68"
Spindle Bore Diameter
2.99"
Spindle Motor
30 HP
C-Axis Min. Programmable Angle
.001 L&R
C-Axis Rapid Traverse Rate
600 RPM
Y-Axis Travel
3.93"
Y-Axis Rapid Traverse Rate
295 IPM
X1 Axis Travel
6.5"
X-Axis Rapid Traverse Rate
787 IPM
Z-Axis Rapid Traverse Rate
1574 IPM
Turret Stations
24 + 24
Tool Holder Type
BMT 55P
Turning Tool Shank Size
.75"
Boring Bar Diameter
1.25"
Rotating Tool Speed
5000 RPM
Rotating Tool Motor
7.5 HP
Rotating Tool Collet Type
ER-25
Milling Collet Capacity
.079"-.629"
Net Weight
17,196 lbs.
Equipped With:
Fanuc 18i-TB CNC Control
Full C Axis Spindle Rotation - Both Spindles
Live Milling/Drilling Capability - Both Turrets
Y Axis Capability on Upper Turret
Twin Turret Design with Upper and Lower Turrets
Dual Spindle Design
LNS Servo S2 Short Load Barfeeder
Hydraulic Chucks on both Spindles
Tool Presetter
Parts Catcher
Parts Exit Conveyor
Chip Conveyor
PCMCIA Card Interface
RS 232 Port Interface
3 Color Machine Status Condition Lights
Boxed Ways
Coolant Tank with Pump
All Available Manuals
All Available Static Tooling ONLY
Wired 200/220V Electrics
NOTES:
Mist Buster in Photos is NOT included
Manufactured New in September of 2007
Upper Turret Operating Hours 21,551
Lower Turret Operating Hours 17,375
Features:
✓
Fanuc 18i-TB CNC Control
✓
Full C Axis Spindle Rotation - Both Spindles
✓
Live Milling/Drilling Capability - Both Turrets
✓
Y Axis Capability on Upper Turret
✓
Twin Turret Design with Upper and Lower Turrets
✓
Dual Spindle Design
✓
LNS Servo S2 Short Load Barfeeder
✓
Hydraulic Chucks on both Spindles
✓
Tool Presetter
✓
Parts Catcher
✓
Parts Exit Conveyor
✓
Chip Conveyor
✓
PCMCIA Card Interface
✓
RS 232 Port Interface
✓
3 Color Machine Status Condition Lights
✓
Boxed Ways
✓
Coolant Tank with Pump
✓
All Available Manuals
✓
All Available Static Tooling ONLY
Request a Quote Today
Enter your email address for detailed product information.
OR Contact Us at 631-249-5566
[email protected]
Get Financing
One Click Financing. Learn more here.
One Click Financing. Learn more here.
Auctions & Liquidations
Looking for a great deal? Click here.
Looking for a great deal? Click here.
